Baldwin Filters
Baldwin Filters H9058 Hydraulic Filter Element 13 3/16 in
Cartridge-style hydraulic filter element with 5-micron wire-mesh media, 13 3/16 in length and integral gaskets
- TypeAutomotive Filters
- Reliable hydraulic filtration with 5 micron rating
- Extended service life from wire mesh support
- Secure sealing via two integral gaskets
- Precise fit at 13 3/16 inch height
- Trusted Baldwin Filters quality for hydraulic systems
Baldwin Filters H9058 Hydraulic Element
The Baldwin Filters H9058 is a cartridge-style hydraulic filter element designed for fluid power systems that require 5-micron filtration. It serves maintenance teams and equipment operators who need a direct replacement element with integral sealing. The unit includes two integral gaskets for a complete seal without separate hardware. Threaded connections are not applicable for this element-only design.
Sustained-load filtration behaviour
Under continuous flow the wire-mesh supported media maintains its 5-micron rating without the collapse risk that can appear in unsupported pleats during pressure spikes. The rigid construction keeps pleat spacing stable so contaminant capacity is used evenly across the element surface. This steady performance extends service intervals compared with elements that deform under prolonged differential pressure. The cartridge fits existing housings that accept the given dimensions.
Thermals noise and power draw
As a passive filtration component the element generates no heat, noise or electrical draw of its own. System temperature and pump noise remain governed by the hydraulic circuit and prime mover rather than by the filter. The low restriction of the clean element minimises the pressure drop that would otherwise add parasitic load to the pump. Integral gaskets prevent bypass leaks that could degrade fluid cleanliness over time.
Highlights
- Reliable hydraulic filtration with 5 micron rating
- Extended service life from wire mesh support
- Secure sealing via two integral gaskets
- Precise fit at 13 3/16 inch height
- Trusted Baldwin Filters quality for hydraulic systems
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
Does the H9058 cartridge generate noticeable noise or heat when the hydraulic system runs continuously?
The element is a passive wire-mesh cartridge with a 5-micron rating and no moving parts, so it adds no noise or heat during all-day operation.
What fittings or housing must I already have to install the H9058 filter element?
You need a compatible filter housing that accepts a cartridge 13 3/16 in long with a 3 25/32 in outside diameter and a 2 3/16 in inside diameter; the element includes two integral gaskets and has no threads.
Will the H9058 work in an older hydraulic circuit that previously used a coarser filter element?
The 5-micron wire-mesh media is finer than many legacy elements, so it will trap smaller particles but may require more frequent changes if the older system generates higher contamination levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
