Baldwin Filters
Baldwin Filters H9041 Hydraulic Filter Element 4-1/2" L
A hydraulic cartridge filter element with wire-mesh support, 4-1/2 in tall and 1 25/32 in diameter, includes an integral gasket
- TypeAutomotive Filters
- Wire-mesh support resists collapse under pressure
- Integral gasket seals without extra parts
- 4-1/2 inch length fits tight housings
- 1 25/32 inch diameter matches spec
- 1 1/32 inch bore aligns with flow path
Baldwin Filters H9041 Hydraulic Filter Element
This Baldwin Filters H9041 is a hydraulic filter element designed for fluid power systems. It features a cartridge design with wire mesh support and an integral gasket. The element measures 4-1/2 inches in length with an outside diameter of 1 25/32 inches and an inside diameter of 1 1/32 inches. It is supplied new for industrial maintenance use.
Suits maintenance teams needing a wire mesh
This filter suits technicians servicing hydraulic circuits that accept a 4-1/2 inch cartridge with the specified diameters. It is not for buyers who need a spin-on canister style filter or a unit with a threaded mounting base. Systems requiring a different element height, diameter or media type should look at alternative part numbers.
Wire mesh media maintains structure under
The wire mesh supported element resists collapse during sustained hydraulic pressure cycles. The integral gasket provides a consistent seal without separate components. Performance remains stable across the operating pressure range of the host system. Service life depends on contamination levels and fluid condition in the specific application.
Highlights
- Wire-mesh support resists collapse under pressure
- Integral gasket seals without extra parts
- 4-1/2 inch length fits tight housings
- 1 25/32 inch diameter matches spec
- 1 1/32 inch bore aligns with flow path
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
What filter housing do I need to accept the H9041 cartridge with its 1 25/32 in outside diameter and 1 1/32 in inside diameter?
You need a housing that takes a cartridge with a 1 25/32 in outside diameter and a 1 1/32 in inside diameter, and that provides the sealing surface for the integral gasket.
Will the H9041 cartridge fit in my existing filter head that uses the same 4 1/2 in length and 1 25/32 in outside diameter?
Yes, if your current head accepts a 4 1/2 in long cartridge with a 1 25/32 in outside diameter and a 1 1/32 in inside diameter, the H9041 will seat correctly.
How can I confirm the H9041 is sealing properly after installation?
Pressurise the system and check that no fluid leaks past the integral gasket; a clean, dry seal face means the cartridge is seated and working.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
