Baldwin Filters
Baldwin Filters BT8450 Hydraulic Spin-On Filter 9.8 Micron
Hydraulic spin-on filter rated at 9.8 microns with a 15 psid bypass valve for New Holland equipment
- TypeAutomotive Filters
- 8 micron rating protects hydraulic systems from fine contaminants
- Spin-on design enables quick tool-free filter changes
- 15 psid bypass valve maintains flow during cold starts or clogging
- Anti-drainback valve prevents dry starts by retaining oil
- 1 1/4-11 thread fits compatible New Holland equipment directly
Baldwin BT8450 hydraulic spin-on filter
This Baldwin BT8450 hydraulic spin-on filter fits New Holland equipment and carries a 9.8 micron rating. It includes a 15 psid bypass valve and an anti-drainback valve for reliable fluid handling. The 1-1/4 in. -11 thread size matches the specified port. It is a new component ready for installation.
Sustained flow performance
The 9.8 micron media captures fine particles during continuous hydraulic system operation. A 15 psid bypass valve opens only when differential pressure exceeds the set point, protecting the element under heavy load. The anti-drainback valve keeps the housing primed between cycles. These features maintain consistent filtration over long duty periods.
9.8 micron rating decides fit
The 9.8 micron rating is the single specification that determines whether this filter meets the cleanliness target for the hydraulic circuit. A finer or coarser rating would change contamination control and component wear rates. Verify the micron requirement in the equipment manual before ordering. No other dimension overrides this selection criterion.
Highlights
- 8 micron rating protects hydraulic systems from fine contaminants
- Spin-on design enables quick tool-free filter changes
- 15 psid bypass valve maintains flow during cold starts or clogging
- Anti-drainback valve prevents dry starts by retaining oil
- 1 1/4-11 thread fits compatible New Holland equipment directly
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How much pressure drop does the 15 psid bypass valve allow before opening?
The built-in bypass valve opens at 15 psid, letting fluid flow if the filter element becomes restricted.
Which thread size must my hydraulic housing have to accept this spin-on filter?
The filter uses a 1 1/4 in. -11 thread, so the mounting head must match that specification.
Will the 7 3/32 in height fit in the same space as the filter currently on my New Holland equipment?
Overall height is 7 3/32 in; compare that dimension with your existing filter clearance before installing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
