Baldwin Filters
Baldwin Filters BT8443 Hydraulic Oil Filter
Spin-on hydraulic and oil filter rated at 5 microns with an integral gasket for Zinga heads
- TypeAutomotive Filters
- 5 micron rating captures fine contaminants
- Spin-on design allows quick filter changes
- Integral G401 gasket ensures leak-free seal
- 1-12 thread fits Zinga hydraulic heads
- 8-3/16 inch height suits compact installations
Baldwin BT8443 Hydraulic Filter
The Baldwin BT8443 is a spin-on hydraulic and lubrication filter rated at 5 micron. It suits equipment owners and maintenance teams who need reliable contaminant removal for hydraulic circuits. The filter includes a G401 integral gasket and is designed for Zinga hydraulic heads. It threads onto a 1-12 port for straightforward installation.
Sustained Contaminant Capture
Under continuous flow the 5 micron media traps fine particles that cause wear in pumps and valves. The spin-on canister maintains structural integrity through pressure cycles without bypassing unfiltered fluid. The integral gasket seals consistently across temperature swings. Service intervals depend on system cleanliness and operating hours rather than a fixed calendar.
Pre-Installation Verification
Confirm the host head accepts a 1-12 thread and that the 8 3/16 inch height and 3 23/32 inch diameter clear surrounding components. Verify the fluid type is compatible with the filter media and gasket material. Check that the Zinga head mounting pattern matches the canister base. No additional sealing compounds are required.
Highlights
- 5 micron rating captures fine contaminants
- Spin-on design allows quick filter changes
- Integral G401 gasket ensures leak-free seal
- 1-12 thread fits Zinga hydraulic heads
- 8-3/16 inch height suits compact installations
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How much oil pressure can the BT8443 handle during continuous operation?
The filter is rated for a 5 micron filtration level and uses a spin-on design with an integral G401 gasket to maintain a reliable seal under normal hydraulic system pressures.
Which hydraulic head does the BT8443 thread onto?
It fits Zinga hydraulic heads using a 1-12 thread size and measures 3-23/32 inches in outside diameter by 8-3/16 inches in height.
Will the BT8443 replace the filter on my older Zinga hydraulic head?
Yes, if the existing head accepts a 1-12 thread spin-on filter with a 3-23/32 inch outside diameter and 8-3/16 inch height, the BT8443 will install directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
