Baldwin Filters
Baldwin Filters BT839-10 Hydraulic Filter Spin-On 1 in Thread Size
Spin-on hydraulic filter with 12-micron rating and 1-inch thread for Bobcat, Ford, Toro and Vermeer equipment
- TypeAutomotive Filters
- 12 micron rating traps fine particles
- 1-12 thread size fits compatible hydraulic systems
- 5 13/32 inch height matches equipment specifications
- 3 11/16 inch diameter suits tight installations
- G401 integral gasket ensures reliable sealing
Hydraulic Spin-On Filter BT839-10
This Baldwin Filters hydraulic filter uses a spin-on design for straightforward replacement on compatible equipment. It carries a 12 micron rating to capture contaminants in hydraulic fluid. The unit includes a G401 integral gasket for a reliable seal. It suits maintenance on Bobcat, Ford, Toro, Vermeer and Versatile machinery.
1-12 Thread With G401 Gasket
The filter features a 1-12 thread size for direct mounting onto matching hydraulic ports. An integral G401 gasket is built in, removing the need for a separate sealing washer during installation. Dimensions are 5 13/32 in height and 3 11/16 in outside diameter. The spin-on housing allows tool-free removal and fitting in most service positions.
Check Thread And Micron Needs
Verify that your equipment specifies a 1-12 thread and a 12 micron rating before ordering. Confirm the mounting clearance accommodates the 5 13/32 in height and 3 11/16 in diameter. Ensure the hydraulic system matches the listed Cross, Gresen or Michigan Fluid Power applications. Buyers needing a different micron rating or thread pitch cannot use this filter.
Highlights
- 12 micron rating traps fine particles
- 1-12 thread size fits compatible hydraulic systems
- 5 13/32 inch height matches equipment specifications
- 3 11/16 inch diameter suits tight installations
- G401 integral gasket ensures reliable sealing
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
What does the 12 micron rating mean for filtration performance?
The 12 micron rating indicates the filter captures particles 12 microns and larger, protecting hydraulic components from fine contaminants.
What thread size is required for the 1-12 UNF mounting?
The filter uses a 1-12 UNF thread, requiring a compatible 1 inch 12 threads-per-inch port on the hydraulic head.
How is the G401 integral gasket seated during installation?
Spin the filter on until the G401 gasket contacts the base, then tighten an additional three-quarters to one full turn by hand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
