Baldwin Filters
Baldwin Filters BT564 Spin-On HVAC Control
Spin-on oil filter with 18-micron rating and integral gasket fits Allis Chalmers, Bomag and other equipment
- ColorTransparent
- 18 micron rating traps fine contaminants
- Spin-on design allows quick filter changes
- Integral G381-A gasket prevents oil leaks
- 1"-16 thread fits listed equipment models
- 5-13/16 inch height matches OEM specifications
Baldwin BT564 Spin-On Filter
The Baldwin BT564 is a full-flow spin-on oil filter designed for heavy-duty equipment lubrication systems. It fits Allis Chalmers, Bomag, Champion, Fiat-Allis, Freeman and New Idea machinery requiring a one-inch thread connection. The transparent housing allows visual inspection of the element condition during routine maintenance checks.
Upgrade From Cartridge Filters
This spin-on unit replaces older cartridge-style filters that require separate housing disassembly for element changes. The integrated design reduces service time and eliminates the risk of housing seal leaks during reassembly. The switch is worth it when equipment uptime is critical and maintenance intervals demand faster, cleaner filter swaps.
Simple Thread-On Installation
Installation requires cleaning the mounting base, lubricating the included G381-A integral gasket and tightening the filter by hand until the gasket contacts the base, then turning the specified additional amount. Common issues include cross-threading the 1-16 thread or over-tightening, which can distort the gasket and cause oil leaks under pressure.
Highlights
- 18 micron rating traps fine contaminants
- Spin-on design allows quick filter changes
- Integral G381-A gasket prevents oil leaks
- 1"-16 thread fits listed equipment models
- 5-13/16 inch height matches OEM specifications
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
What thread size does the BT564 spin-on filter require for mounting?
The filter mounts on a 1 In. -16 thread, so the housing or adapter must match that exact specification.
Which way should the integral gasket face during installation, and what is the common mistake?
The G381-A integral gasket seats against the mounting base; the common error is overtightening past the recommended contact turn, which can distort the gasket and cause leaks.
When should the BT564 filter be replaced based on its filtration rating?
The filter is rated at 18 micron full-flow filtration; replace it at the equipment manufacturer's service interval or sooner if pressure drop indicates the element is loaded.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
