We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent spin-on oil filter with 3/4 inch thread

Baldwin Filters

Baldwin Filters BT353 Spin-On 3/4" Thread 5-27/32" L hvac control

SKU CH-5G8N-KBFYC

Spin-on oil filter with 18 micron rating, 20 psid bypass valve and anti-drainback valve for Allis Chalmers and Massey Ferguson tractors

  • ColorTransparent
  • Spin-on design enables quick filter changes
  • 18-micron rating captures fine contaminants
  • 20 psid bypass valve maintains oil flow
  • Anti-drainback valve prevents dry starts
  • Fits Allis Chalmers and Massey Ferguson tractors

Application Fit

The Baldwin Filters BT353 is a spin-on oil filter built for full-flow lubrication systems on Allis Chalmers and Massey Ferguson tractors. Its 3/4"-16 thread and compact 5-27/32 inch length suit equipment where space around the engine block is limited.

Upgrade Context

This filter replaces a worn or missing cartridge on the same thread pattern and restores the 18 micron rating with a 20 psid bypass valve and anti-drainback valve. The jump is worth it when the old unit no longer seals, the bypass has stuck open, or service intervals demand a fresh element.

Interface Limits

The 3/4"-16 thread fixes compatibility to engines machined for that pitch; adapters are not covered by the spec. The 18 micron media and 20 psid bypass set the filtration ceiling, so systems needing finer capture or higher bypass pressure fall outside this filter’s design envelope.

Highlights

  • Spin-on design enables quick filter changes
  • 18-micron rating captures fine contaminants
  • 20 psid bypass valve maintains oil flow
  • Anti-drainback valve prevents dry starts
  • Fits Allis Chalmers and Massey Ferguson tractors

Specifications

BrandBALDWIN FILTERS
ColorTransparent

Questions about this item

Will the 3/4"-16 thread on the BT353 match my engine block port?

The BT353 uses a 3/4"-16 thread; verify your engine block port uses the same thread before fitting.

What is the correct torque step that installers often skip on this spin-on filter?

Lubricate the gasket, spin the BT353 on until the gasket contacts the base, then tighten an additional three-quarters to one full turn.

How often should the BT353 be replaced given its 18 micron rating and 20 psid bypass valve?

Replace the BT353 at every engine oil change interval recommended by the tractor manufacturer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.