Baldwin Filters
Baldwin Filters BT274 Hydraulic Filter Spin-On 23 Micron
A hydraulic spin-on filter rated at 23 microns with a 10 psid bypass valve and integral gasket for Case, International and Wayne equipment
- TypeAutomotive Filters
- 23 micron rating captures fine contaminants
- Spin-on design enables quick filter changes
- 10 psid bypass valve maintains flow during clogging
- Integral G381-A gasket ensures reliable sealing
- 1-12 thread fits Case, International and Wayne equipment
Baldwin BT274 Hydraulic Spin-On Filter
The Baldwin BT274 is a spin-on hydraulic filter rated at 23 microns for fine particle capture. It fits Case, International and Wayne equipment using a 1-12 thread size. A built-in 10 psid bypass valve maintains flow if the element becomes restricted. The integral G381-A gasket seals the mounting surface without a separate ring.
Replaces Worn Filter Elements on Compatible
Install this filter when the current element reaches its service interval or shows pressure drop across the housing. The 23 micron rating protects pumps and valves from abrasive wear in the stated applications. The jump is worth it when the original filter is due for change or when contamination tests indicate cleaner fluid is needed.
Limited to 1-12 Thread and Listed Equipment
This filter only mounts on ports cut for a 1-12 thread and on the Case, International and Wayne models referenced by the manufacturer. It will not seal on other thread pitches or flange patterns. The 10 psid bypass setting is fixed and cannot be adjusted for different system pressures. Buyers needing a different micron rating, thread size or bypass pressure must select another part number.
Highlights
- 23 micron rating captures fine contaminants
- Spin-on design enables quick filter changes
- 10 psid bypass valve maintains flow during clogging
- Integral G381-A gasket ensures reliable sealing
- 1-12 thread fits Case, International and Wayne equipment
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
What thread size does the BT274 hydraulic filter use for mounting?
The filter mounts with a 1-12 thread size for spin-on installation.
How do you install the spin-on filter correctly and what step is often missed?
Lubricate the G381-A integral gasket, spin the filter on until the gasket contacts the base, then tighten an additional three-quarters of a turn.
When should the 23-micron hydraulic filter element be replaced?
Replace the filter at the equipment manufacturer's recommended service interval or when the 10 psid bypass valve begins to open.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
