We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal spin-on fuel filter with M24-1.50 thread and integral gasket

Baldwin Filters

Baldwin Filters BF798 Fuel Filter Spin-On 15 micron M24-1.50

SKU CH-DPWK-VSFKV

Spin-on fuel filter rated at 15 micron with M24-1.50 thread and integral gasket

  • 15 micron rating protects injection systems
  • spin-on design enables quick filter changes
  • integral gasket seals without extra parts
  • M24-1.50 thread fits specific fuel lines
  • 6 9/16 in height suits compact engine bays

Baldwin BF798 Fuel Filter

The Baldwin BF798 is a spin-on fuel filter designed for automotive and industrial fuel systems. It uses a 15 micron media rating to remove contaminants before they reach the engine. The filter features an integral gasket and integral post seal for a complete seal in one assembly. It threads onto a M24-1.50 port for direct installation.

Replacing a clogged spin-on filter

This filter replaces an existing spin-on unit when the service interval is reached or fuel flow becomes restricted. The jump is worth it when the old element can no longer trap particles at the 15 micron level. A fresh BF798 restores the intended filtration efficiency for the fuel system. It fits the same M24-1.50 thread as the outgoing filter housing.

Verify thread size and clearance

Check that the engine or filter head uses a M24-1.50 thread before ordering. Confirm the 6 9/16 inch height and 3 11/16 inch diameter clear the surrounding brackets and lines. Ensure the integral gasket and post seal design matches the sealing surface of your housing. The unit includes the seals required for installation.

Highlights

  • 15 micron rating protects injection systems
  • spin-on design enables quick filter changes
  • integral gasket seals without extra parts
  • M24-1.50 thread fits specific fuel lines
  • 6 9/16 in height suits compact engine bays

Specifications

BrandBALDWIN FILTERS

Questions about this item

What thread size does the BF798 spin-on filter require for mounting?

The filter mounts on an M24 x 1.50 thread, so the engine or filter head must provide that exact thread pitch for a proper seal.

How do you install the BF798 and what step is often missed?

Lubricate the integral gasket with clean fuel, spin the filter on until the gasket contacts the base, then tighten an additional three-quarters to one full turn by hand — skipping the lubrication step causes leaks.

When should the BF798 be replaced and what indicates it is due?

Replace at the engine manufacturer's recommended interval or sooner if fuel flow drops, the filter canister shows damage, or the integral post seal weeps fuel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.