Baldwin Filters
Baldwin Filters BF7922 Fuel Filter Spin-On 5 Micron
Spin-on fuel filter with a 5 micron rating and M20-1.50 thread for secure engine protection
- 5 micron filtration protects engine components
- Spin-on design allows quick filter changes
- M20-1.50 thread fits specified fuel systems
- 7 7/32 inch height matches OE dimensions
- Furnished G401 gasket ensures reliable seal
Baldwin Filters BF7922 Fuel Filter
The Baldwin Filters BF7922 is a spin-on fuel filter designed for automotive and light commercial fuel systems. It carries a 5 micron rating to trap fine contaminants before they reach injectors or carburettors. A furnished G401 gasket is attached for a ready-to-install seal.
Spin-On Interface Limits
The filter uses an M20 x 1.50 thread for direct mounting on compatible filter heads. Its overall height and length are 7 7/32 inches with a 3 11/16 inch outside diameter, so the mounting location must accommodate these dimensions. No integrated bypass valve is mentioned, so system pressure characteristics must be managed elsewhere.
Pre-Installation Checks
Verify that the existing filter head provides an M20 x 1.50 thread and sufficient clearance for the 7 7/32 inch installed height. Confirm the fuel system operates within the filter's micron rating and flow requirements. Ensure the supplied G401 gasket material is compatible with the fuel type in use.
Highlights
- 5 micron filtration protects engine components
- Spin-on design allows quick filter changes
- M20-1.50 thread fits specified fuel systems
- 7 7/32 inch height matches OE dimensions
- Furnished G401 gasket ensures reliable seal
Specifications
| Brand | BALDWIN FILTERS |
|---|
Questions about this item
Should I choose the 5 micron version or a different micron rating for this Baldwin BF7922 fuel filter?
The BF7922 is only offered at a 5 micron rating; select this filter when your engine requires that specific filtration level.
What does the 5 micron rating mean once the BF7922 is installed in my fuel system?
It traps particles 5 microns and larger, protecting injectors and pumps from fine contaminants that pass through coarser filters.
The thread is listed as M20-1.50 — what does that cap in practice when fitting the filter?
It limits installation to housings or heads with an M20 x 1.50 thread; verify your mount matches before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



