We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical metal fuel filter, 24 inches long, silver finish

Baldwin Filters

Baldwin Filters BF7763 Fuel Filter 24 in accessory

SKU CH-5VW5-FC6SP

An in-line fuel filter measuring 24 inches tall and wide with a 1-31/32 inch diameter, featuring a 3/8 inch inlet and 5/16 inch outlet

  • In-line design keeps fuel flowing cleanly
  • 24 in height fits tight engine bays
  • 1 31/32 in width matches standard brackets
  • 3/8 in inlet and 5/16 in outlet connect directly
  • Includes 5/16 in return line ground wire

Baldwin BF7763 Fuel Filter Overview

The Baldwin BF7763 is an in-line fuel filter designed for automotive and equipment fuel systems. It installs directly in the fuel line to trap contaminants before they reach the engine. Mechanics and fleet operators use it to maintain clean fuel delivery across compatible applications.

Physical Dimensions and Flow

The filter housing measures 24 in height and 24 in length with a width of 1 31/32 in and an outside diameter of 1 31/32 in. Fuel enters through a 3/8 in inlet and exits via a 5/16 in outlet. A 5/16 in return line ground wire is included in the assembly.

Mounting and Daily Use

In-line placement means the filter sits between supply and return lines without a separate bracket requirement. The 3/8 in and 5/16 in barbed connections accept standard fuel hose and clamps. Technicians should verify hose routing clearance for the 24 in body length before installation. Not suited for systems requiring threaded port adapters or larger diameter flow paths.

Highlights

  • In-line design keeps fuel flowing cleanly
  • 24 in height fits tight engine bays
  • 1 31/32 in width matches standard brackets
  • 3/8 in inlet and 5/16 in outlet connect directly
  • Includes 5/16 in return line ground wire

Specifications

BrandBALDWIN FILTERS

Questions about this item

How do I install the Baldwin Filters BF7763 fuel filter and which step is commonly done wrong?

Mount the in-line filter between the 3/8 in inlet and 5/16 in outlet, orient the flow arrow toward the engine, and attach the included 5/16 in return-line ground wire to a clean chassis point — skipping the ground wire is the step most often missed.

What maintenance or replacement will the BF7763 fuel filter need later?

Replace the filter element at the vehicle manufacturer's recommended interval or sooner if fuel flow drops; the housing stays in place, so only the cartridge is swapped.

What limit appears first on the BF7763 fuel filter during sustained high-flow use?

The 1 31/32 in outside diameter and fixed 3/8 in inlet / 5/16 in outlet restrict maximum flow, so pressure drop across the element becomes the limiting factor before the housing itself reaches any structural limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.