Baldwin Filters
Baldwin Filters BF7656 Fuel Filter Spin-On 25 micron M22-1.50
Spin-on fuel filter rated at 25 micron with M22-1.50 thread and integral gasket
- 25 micron rating removes fine contaminants
- Spin-on design enables quick filter changes
- M22-1.50 thread fits compatible fuel systems
- Integral gasket and post seal prevent leaks
- 7 19/32 inch height matches OE dimensions
Baldwin BF7656 Spin-On Fuel Filter
The Baldwin BF7656 is a spin-on fuel filter designed for primary filtration in diesel and gasoline systems. It targets vehicle owners and fleet mechanics who need a direct replacement cartridge with a 25 micron rating. The unit installs by hand using the integral M22-1.50 thread, making routine service straightforward.
Build Quality and Daily Fit
A steel canister houses the media and carries an integral gasket plus an integral post seal to prevent bypass leaks. The outside diameter measures 4 1/4 inches and the overall height is 7 19/32 inches, so clearance around the mounting pad must accommodate those dimensions. The single M22-1.50 thread means the filter spins onto the existing head without adapters.
Practical Limits of 25 Micron Rating
A 25 micron nominal rating stops larger contaminant particles while allowing adequate flow for standard pump volumes. It will not capture finer debris that a tighter micron cartridge would trap, so systems requiring finer protection need a different element. The spin-on design also limits use to heads that accept the M22-1.50 thread pattern.
Highlights
- 25 micron rating removes fine contaminants
- Spin-on design enables quick filter changes
- M22-1.50 thread fits compatible fuel systems
- Integral gasket and post seal prevent leaks
- 7 19/32 inch height matches OE dimensions
Specifications
| Brand | BALDWIN FILTERS |
|---|
Questions about this item
What thread size does the BF7656 fuel filter use for installation?
The BF7656 fuel filter uses an M22-1.50 thread size for secure mounting onto compatible fuel filter heads.
What are the overall dimensions of this spin-on fuel filter?
This filter measures 7 19/32 inches in height and length with a 4 1/4 inch outside diameter for proper fitment.
How do you correctly install the integral gasket on this filter?
Lubricate the integral gasket with clean fuel, hand-tighten until the gasket contacts the base, then turn an additional half to three-quarters turn.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



