We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver spin-on fuel filter cylinder with integral gasket and threaded base

Baldwin Filters

Baldwin Filters BF588 Fuel Filter Spin-On 7 micron

SKU CH-JETK-CA5V8

Spin-on secondary fuel filter rated at 7 microns with 7/8 in.-14 threads and integral gasket

  • 7 micron filtration protects injectors from fine contaminants
  • Spin-on design enables quick filter changes without tools
  • Integral G381-A gasket seals reliably without extra parts
  • 7/8-14 thread fits compatible fuel systems directly
  • 7-11/32 inch height matches standard housing dimensions

Baldwin BF588 Fuel Filter Spin-On

The Baldwin BF588 is a secondary spin-on fuel filter designed for automotive and industrial fuel systems. It carries a 7 micron rating to capture fine contaminants before fuel reaches the engine. The canister measures 7 11/32 inches in height and length with a 4 1/4 inch outside diameter. An integral G381-A gasket and post seal are included for a reliable fit.

Suited for 7/8-14 thread systems

This filter fits fuel heads or housings that accept a 7/8 inch -14 thread size and the listed dimensions. It serves operators needing a secondary filtration stage with a 7 micron rating. Buyers whose equipment requires a different thread pitch, a different micron rating, or a primary filter head design should look at other parts. Vehicles or machinery with non-spin-on filter housings cannot use this unit.

Thread size 7/8 inch -14 decides fit

The single specification that determines whether this is the correct part is the 7/8 inch -14 thread size. The filter must match the exact thread on the fuel filter head or housing to seal and function. Always verify the thread specification on the equipment before ordering. No other dimension or rating overrides this compatibility requirement.

Highlights

  • 7 micron filtration protects injectors from fine contaminants
  • Spin-on design enables quick filter changes without tools
  • Integral G381-A gasket seals reliably without extra parts
  • 7/8-14 thread fits compatible fuel systems directly
  • 7-11/32 inch height matches standard housing dimensions

Specifications

BrandBALDWIN FILTERS

Questions about this item

What thread size does the BF588 use for its spin-on mounting?

The filter mounts on a 7/8 In. -14 thread, so the housing or adapter must match that pitch and diameter exactly.

How much clearance does the 7 11/32 in height and 4 1/4 in outside diameter require?

Allow at least 7 11/32 in of vertical space and a 4 1/4 in diameter circle for the canister to seat without interference.

Does the integral G381-A gasket seal on its own, or is a separate post seal also needed?

Both the integral G381-A gasket and the integral post seal are built in; install the filter dry and torque to spec without adding extra seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.