Baldwin Filters
Baldwin Filters B7511 Lube Filter 3-11/16 in. O.D. hvac control
Spin-on lube filter with 9.8 micron rating, 14 psid bypass valve, anti-drainback valve, and 3/4-16 thread size
- ColorTransparent
- 8 micron rating captures fine contaminants
- Spin-on design enables quick filter changes
- 14 psid bypass valve maintains oil flow
- Anti-drainback valve prevents dry starts
- 3/4 in.-16 thread fits compatible engines
Baldwin Filters B7511 Lube Filter
This spin-on lube filter from Baldwin Filters is built for engine lubrication systems requiring a 9.8 micron rating. It fits applications using a 3/4 in.-16 thread and a 3-11/16 in. outside diameter. The unit includes a 14 psid bypass valve and an anti-drainback valve. It is sold new for automotive maintenance.
Installation notes and common issues
Installation is straightforward: clean the mounting surface, lubricate the gasket, and spin the filter on by hand until the gasket seats, then tighten the recommended additional turn. The most frequent problem is cross-threading the 3/4 in.-16 thread or forgetting to remove the old gasket, which causes leaks. Over-tightening can damage the canister or make removal difficult.
Practical limits of the spin-on interface
The spin-on design limits service to the filter’s rated capacity and the 14 psid bypass setting; once the media loads, the valve opens and unfiltered oil circulates. The 9.8 micron rating captures most wear particles but does not stop sub-micron contaminants. The fixed thread size and outside diameter mean the filter only fits housings matched to those dimensions.
Highlights
- 8 micron rating captures fine contaminants
- Spin-on design enables quick filter changes
- 14 psid bypass valve maintains oil flow
- Anti-drainback valve prevents dry starts
- 3/4 in.-16 thread fits compatible engines
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
How do I confirm the 9.8 micron filter is working after installation?
Check for proper oil pressure on the gauge and verify no leaks at the 3/4 in.-16 thread seal once the engine runs.
What comes with the B7511 lube filter and what must I source separately?
The spin-on filter includes a 14 psid bypass valve and anti-drainback valve; you supply the engine oil and any required mounting hardware.
Which Baldwin filter should I choose if my engine calls for a 3-11/16 in. outside diameter spin-on?
The B7511 matches that 3-11/16 in. O.D. spec with a 9.8 micron rating and 3/4 in.-16 thread.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
