We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spin-on oil filter with transparent housing and attached gasket

Baldwin Filters

Baldwin Filters B7388 HVAC control

SKU CH-CZBT-4FBGP

Spin-on oil filter with a 9.8 micron rating and 40 psid bypass valve for Iveco Daily and Mitsubishi trucks

  • ColorTransparent
  • 8 micron rating traps fine contaminants
  • 40 psid bypass valve maintains flow under pressure
  • Anti-drainback valve prevents dry starts
  • M22-1.50 thread fits Iveco Daily and Mitsubishi Trucks
  • G381-A gasket included for leak-free seal

Product identity

Baldwin Filters B7388 is a spin-on oil filter built for heavy-duty diesel engines. It uses a 9.8 micron rating and a 40 psid bypass valve to maintain flow under cold starts or high load. The metal canister measures 5-3/8 inches tall with a 3-11/16 inch diameter.

Fitment guidance

This filter threads onto M22 x 1.50 ports found on Iveco Daily and select Mitsubishi trucks. It includes an anti-drainback valve to prevent dry starts after shutdown. Builders working on petrol engines, smaller commercial vans or passenger cars should verify thread size and micron rating before ordering.

Included hardware

A G381-A gasket is pre-attached to the base plate so no separate seal is required. The bypass valve and anti-drainback function are integrated into the cartridge. No additional gaskets, lubricant packets or installation tools are supplied in the box.

Highlights

  • 8 micron rating traps fine contaminants
  • 40 psid bypass valve maintains flow under pressure
  • Anti-drainback valve prevents dry starts
  • M22-1.50 thread fits Iveco Daily and Mitsubishi Trucks
  • G381-A gasket included for leak-free seal

Specifications

BrandBALDWIN FILTERS
ColorTransparent

Questions about this item

Does the B7388 require a specific thread size on the engine block for installation?

The B7388 uses an M22 x 1.50 thread size, so the engine mounting pad must match that specification for a proper seal.

Can the B7388 replace an older filter that did not have an anti-drainback valve?

Yes, the B7388 includes an anti-drainback valve which prevents oil from draining back after shutdown, adding protection older filters may lack.

How can I confirm the B7388 is sealing correctly after installation?

After fitting, run the engine and check the G381-A gasket area for any oil weep; the 40 psid bypass valve will open only if the filter becomes restricted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.