Baldwin Filters
Baldwin Filters B7350 Spin-On M22 x 1.5mm Thread 6-11/16" L HVAC Control
Spin-on oil filter with M22 x 1.5mm thread, 35 psid bypass valve and integral gasket for Gillisons GVF5000 and JCB equipment
- ColorTransparent
- Spin-on design enables quick filter changes
- M22 x 1.5mm thread fits Gillisons GVF5000 and JCB equipment
- 35 psid bypass valve maintains oil flow under pressure
- Anti-drainback valve prevents dry starts
- Integral gasket seals without extra parts
Baldwin B7350 Spin-On Oil Filter
The Baldwin B7350 is a spin-on oil filter built with an M22 x 1.5mm thread and an overall length of 6-11/16 inches. It includes a 35 psid bypass valve, anti-drainback valve, check valve and an integral gasket. The transparent housing allows visual inspection of the element condition.
Replaces Gillions GVF5000 and JCB fitments
This filter is specified for Gillions GVF5000 lift trucks and a range of J. C. Bamford generators and equipment. The jump is worth it when the original filter is due for change or when a bypass valve rated at 35 psid matches the OEM pressure setting. It restores full filtration capacity and valve function in a single service step.
Suits lift-truck and generator fleets using M22
Fleets running Gillions GVF5000 units or compatible JCB power packs will find the thread and valve specification match the service manual. Buyers who need a different thread size, a different bypass rating or a cartridge-style element should look at something else.
Highlights
- Spin-on design enables quick filter changes
- M22 x 1.5mm thread fits Gillisons GVF5000 and JCB equipment
- 35 psid bypass valve maintains oil flow under pressure
- Anti-drainback valve prevents dry starts
- Integral gasket seals without extra parts
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
Does the M22 x 1.5mm thread match the Gillisons GVF5000 lift truck filter housing?
Yes, the thread size M22 x 1.50 is specified for use with Gillisons GVF5000 lift trucks and J. C. Bamford generators and equipment.
How do I install the spin-on filter and what step is commonly missed?
Lubricate the integral gasket with clean oil, thread the filter onto the M22 x 1.5mm mount by hand until the gasket contacts the base, then tighten an additional three-quarters to one full turn.
When should the bypass valve and anti-drainback valve be checked or the filter replaced?
Replace the filter at the engine or equipment manufacturer's recommended service interval; the 35 psid bypass valve and anti-drainback valve are integral and require no separate maintenance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
