We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent spin-on oil filter with M18 x 1.5 thread

Baldwin Filters

Baldwin Filters B35-S Spin-On M18 x 1.50 HVAC Control

SKU CH-61HK-WK67A

Spin-on oil filter with 18 micron rating, M18 x 1.50 thread and anti-drainback valve for GM vehicles

  • ColorTransparent
  • 18 micron filtration protects engine components
  • M18 x 1.50 thread fits GM automotive applications
  • Anti-drainback valve prevents dry starts
  • G449-B gasket ensures leak-free sealing
  • 4-27/32 inch height matches OEM specifications

Baldwin Filters B35-S Spin-On Filter

This Baldwin Filters B35-S is a full-flow spin-on oil filter designed for GM automotive cars, light-duty trucks and vans. It uses an M18 x 1.50 thread size and includes an anti-drainback valve to retain oil after shutdown.

Replaces standard filters needing M18 x 1.50 fit

The unit upgrades basic filtration with an 18 micron rating and a G449-B attached gasket for a reliable seal. The jump is worth it when the original filter lacks a drainback valve or uses a coarser micron rating.

Simple spin-on install with hand tightening

Installation follows standard spin-on procedure: lubricate the gasket, thread onto the mount and tighten by hand. What usually goes wrong is cross-threading the M18 x 1.50 threads or over-tightening, which can damage the gasket or housing.

Highlights

  • 18 micron filtration protects engine components
  • M18 x 1.50 thread fits GM automotive applications
  • Anti-drainback valve prevents dry starts
  • G449-B gasket ensures leak-free sealing
  • 4-27/32 inch height matches OEM specifications

Specifications

BrandBALDWIN FILTERS
ColorTransparent

Questions about this item

What thread size does the B35-S spin-on filter use for mounting?

The B35-S filter mounts with an M18 x 1.50 thread size that matches the engine block port.

Which step is commonly missed when installing this spin-on filter?

Lubricate the attached G449-B gasket with clean oil before threading the filter on by hand until the gasket contacts the base, then tighten the specified additional turn.

When should the B35-S filter be replaced during routine maintenance?

Replace this 18 micron spin-on filter at every engine oil change interval recommended by the vehicle manufacturer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.