Baldwin Filters
Baldwin Filters B201-S HVAC control spin-on M20 x 1.5mm 3-3/16 in
Spin-on oil filter with M20 x 1.5 mm thread and 23 micron rating for Ford and Mazda vehicles
- ColorTransparent
- Spin-on design enables quick filter changes
- 23 micron rating captures fine contaminants
- Integral gasket provides reliable sealing
- M20 x 1.5mm thread fits Ford and Mazda applications
- 3-3/16 inch height suits compact engine bays
Baldwin B201-S spin-on oil filter
The Baldwin Filters B201-S is a spin-on oil filter built for Ford and Mazda automotive and light-duty trucks. It uses an M20 x 1.5mm thread and a 23 micron rating to trap contaminants in the lubrication system. The transparent housing allows a quick visual check of the element condition. An integral gasket is included to simplify installation and sealing.
Replaces cartridge or worn spin-on filters
This unit upgrades from older cartridge-style housings or a tired spin-on canister that no longer seals properly. The jump is worth it when the service interval calls for a fresh 23 micron element and the M20 x 1.5mm thread matches the engine block. It restores full bypass-lube flow without adapting the mounting surface.
Limited to M20 x 1.5mm thread and 23 micron rating
The filter only fits applications specifying the M20 x 1.5mm thread pitch and the stated micron rating. Builders needing a different thread size, a finer or coarser element, or a non-spin-on design cannot use this part. The integral gasket suits the factory flange but does not adapt to other sealing faces.
Highlights
- Spin-on design enables quick filter changes
- 23 micron rating captures fine contaminants
- Integral gasket provides reliable sealing
- M20 x 1.5mm thread fits Ford and Mazda applications
- 3-3/16 inch height suits compact engine bays
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
What thread size does the Baldwin Filters B201-S spin-on filter require for mounting?
The filter mounts with an M20 x 1.5mm thread size that must match the engine block or filter head exactly.
How is the Baldwin Filters B201-S installed, and what step is often missed?
Spin the filter on by hand until the integral gasket contacts the base, then tighten the specified additional turn; skipping the gasket-contact step causes leaks.
When will the Baldwin Filters B201-S need replacement, and what indicates it?
Replace the filter at the vehicle manufacturer's recommended service interval or when the 23-micron media reaches its contaminant-holding limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
