Baldwin Filters
Baldwin Filters B1402 HVAC control
Spin-on oil filter with 18 micron rating, 14 psid bypass and anti-drainback valve for multiple vehicle brands
- ColorTransparent
- 18-micron filtration traps fine contaminants
- 14 psid bypass valve maintains flow under pressure
- Anti-drainback valve prevents dry starts
- M20×1.5 thread fits multiple vehicle brands
- Spin-on design enables quick filter changes
Baldwin B1402 spin-on oil filter
This Baldwin B1402 spin-on oil filter serves engines in a wide range of passenger vehicles from brands such as Dodge, Ford, Honda, Nissan and others. It fits applications that call for an M20 x 1.50 thread and a 3 1/2-inch tall cartridge. The filter is supplied new and ready for routine service intervals.
18-micron media with 14 psid bypass
The filter element captures particles down to 18 micron and incorporates a 14 psid bypass valve that opens only when pressure differential exceeds the set point, protecting flow during cold starts or heavy loading. An anti-drainback valve retains oil in the canister after shutdown, so pressure rebuilds faster on the next start. Transparent housing lets technicians confirm media condition at a glance.
Direct spin-on installation
Installation is a straightforward spin-on procedure: clean the mounting surface, lubricate the gasket and tighten to the vehicle manufacturer’s torque specification. The only common issue is cross-threading the M20 x 1.50 threads if the filter is forced; hand-starting several turns before using a wrench prevents this. No special tools or adapters are required beyond a standard oil-filter wrench.
Highlights
- 18-micron filtration traps fine contaminants
- 14 psid bypass valve maintains flow under pressure
- Anti-drainback valve prevents dry starts
- M20×1.5 thread fits multiple vehicle brands
- Spin-on design enables quick filter changes
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Color | Transparent |
Questions about this item
How much power does the B1402 draw when the engine runs all day?
The B1402 is a passive spin-on filter with no electrical connection, so it draws zero power and adds no heat to the system.
What thread size must the engine block have for the B1402 to seal?
The filter uses an M20 × 1.50 thread, so the mounting stud on the engine must match that pitch and diameter.
Will the 18 micron rating of the B1402 protect an older engine that originally used a coarser filter?
Yes, the 18 micron media traps finer particles than many original filters, and the 14 psid bypass valve ensures flow if the element loads up.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
