We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 32.8 foot flexible LED strip on a 10mm wide white PCB reel

Baldwin F0B5M24V378LWWW30 LED Strip 528LED/m 14W/m 32.8FT DC24V 3000K CRI 90+ 10mm

SKU CH-ADMV-HRA81

High-density FCOB LED strip delivers uniform 3000 K warm white light at 528 LEDs/m with CRI 90+ across 32.8 ft

  • TypeFluorescent Lamp Sleeves
  • Watts70 watts
  • Size/Dimensions32.8 feet
  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • Length32.8 feet
  • Lamp ToneCool
  • Uniform spot-free light from 528 FCOB LEDs per metre
  • Accurate colour rendering with CRI 90+ at 3000K warm white
  • Dimmable via ELV TRIAC DMX DALI 0-10V RF controllers
  • Cuttable and linkable 10mm strip with DC plugs on both ends
  • 65000-hour lifespan on double-layer copper PCB

High-density FCOB LED strip

The Baldwin F0B5M24V378LWWW30 is a flexible chip-on-board LED strip delivering 528 LEDs per metre at 14 W per metre across a 32.8-foot reel. Its 3000 K warm-white output and CRI 90+ suit indoor decorative lighting where uniform, spot-free illumination is required.

Verify voltage, dimming and mounting

Confirm your installation runs on DC24 V and that the power supply can handle the total wattage of the length you plan to use. The strip works with ELV, TRIAC, DMX, DALI, 0-10 V and RF dimmers, but controllers are sold separately. Cut points are marked for custom lengths and the 10 mm width fits standard aluminium profiles.

Steady output over long runs

Double-layer copper PCB construction improves heat dissipation so brightness and colour remain consistent during continuous operation. The design is rated for more than 65 000 hours of service life, and the IP30 rating means it is intended for dry indoor environments only.

Highlights

  • Uniform spot-free light from 528 FCOB LEDs per metre
  • Accurate colour rendering with CRI 90+ at 3000K warm white
  • Dimmable via ELV TRIAC DMX DALI 0-10V RF controllers
  • Cuttable and linkable 10mm strip with DC plugs on both ends
  • 65000-hour lifespan on double-layer copper PCB

Specifications

TypeFluorescent Lamp Sleeves
BrandBaldwin
ModelHand Rivet Nut Setter Kit
Watts70 watts
Size/Dimensions32.8 feet
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Length32.8 feet
Lamp ToneCool
Standards/CertificationsUL Listed/CSA Certified
Color Temperature3000 kelvin
FeaturesWidely Use
Light ColorWhite
Part NumberF0B5M24V378LWWW30

Questions about this item

Does the strip include a power supply or controller, or must I buy them separately?

The listing states no adapter or controller is included; you need a DC24V 5.5mm × 2.1mm power supply and a compatible dimmer or controller kit such as the RF 14-key, SP630E+RB1 or similar.

Which LED density and wattage version does this reel represent?

This reel is the 528 LEDs per metre, 14 watts per metre variant on a 10 mm wide PCB; the supplier also offers 336 LEDs/m at 8 W/m and 480 LEDs/m at 9 W/m on narrower 8 mm strips.

What does the 14 W/m rating mean for a full 32.8 ft installation?

A full 32.8 ft (10 m) run draws about 140 watts at DC24V, so choose a power supply rated above that figure and ensure voltage drop is managed for uniform brightness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.