Baldwin 4" x 10" Register Booster Fan 140 CFM 3600 RPM
A flush-mount register booster fan delivers 140 CFM at 3600 RPM with smart thermostat control, five speeds, remote operation and quiet dual ball-bearing motors for balanced room airflow
- Air Flow140 cubic_feet_per_minute
- Motor RPM3600 rpm
- Fan RPM3600 rpm
- Hznot_applicable
- PhaseCorded Electric
- Mount TypeFlush Mount, Drop-In Installation
- Delivers up to 140 CFM airflow to balance room temperatures
- Smart thermostat runs fan only when HVAC operates saving energy
- Dual ball-bearing motor at 3600 RPM runs quietly for bedrooms
- Remote and onboard controls adjust five speeds without bending
- Flush-mount drop-in design fits 4 x 10 inch register openings
Boosts HVAC Airflow to Problem Rooms
This 4" x 10" register booster fan mounts flush into standard floor or wall vents and delivers up to 140 CFM at 3600 RPM. It is designed for homeowners who need to push heated or cooled air into upstairs bedrooms, distant corners or other hard-to-reach spaces without modifying the central HVAC system. The unit runs on corded electric power and requires an existing forced-air duct opening.
Drop-In Installation With Smart Thermostat
The fan drops into the vent opening and uses a built-in temperature sensor to activate only when the HVAC system is moving air, so it adds no load during idle periods. No wiring, Wi-Fi or app setup is needed; the onboard controls and included remote handle speed, mode and timer adjustments. It frees the occupant from manually balancing registers or running portable heaters and fans in under-served rooms.
Quiet Dual Ball-Bearing Operation
Dual ball-bearing motors keep mechanical noise low enough for bedrooms and nurseries, and a display-off night mode removes light disturbance after dark. The fan draws power only while the HVAC blower runs, limiting overall electricity use to active heating or cooling cycles. Normal operation stays within the rated 140 CFM and 3600 RPM without additional cooling requirements.
Highlights
- Delivers up to 140 CFM airflow to balance room temperatures
- Smart thermostat runs fan only when HVAC operates saving energy
- Dual ball-bearing motor at 3600 RPM runs quietly for bedrooms
- Remote and onboard controls adjust five speeds without bending
- Flush-mount drop-in design fits 4 x 10 inch register openings
Specifications
| Brand | Baldwin |
|---|---|
| Air Flow | 140 cubic_feet_per_minute |
| Motor RPM | 3600 rpm |
| Fan RPM | 3600 rpm |
| Hz | not_applicable |
| Phase | Corded Electric |
| Mount Type | Flush Mount, Drop-In Installation |
| Fan Type | floor_fan |
Questions about this item
Does the 140 CFM airflow stay consistent when the fan runs all day?
The built-in thermostat activates the booster only when heated or cooled air is moving through the duct, so it cycles with the HVAC system instead of running continuously at 140 CFM.
How quiet is the 3600 RPM motor during overnight operation?
Dual ball-bearing construction keeps the motor running smoothly at 3600 RPM, and display-off night mode removes light and sound for bedrooms or nurseries.
What duct size must already exist for this 4" x 10" model to fit?
A standard 4-inch by 10-inch floor or wall register opening is required for the flush-mount, drop-in installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
