We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel wire rope coupling 3/16 inch diameter 250 feet length 840 lb working load limit

B-LINE

B-LINE BKW188 Wire Rope Coupling 3/16 in 250 ft 840 lb WLL

SKU CH-PNST-HH7BY

Galvanized steel wire rope with 840 lb working load limit supplied on a 250 ft reel

  • 840 lb working load limit for secure lifting
  • 250 ft continuous length reduces splice points
  • 7 x 19 strand construction delivers flexibility and strength
  • Galvanised steel resists corrosion in harsh environments
  • cULus listed for verified safety compliance

3/16 inch galvanized wire rope

This 250 ft length of 3/16 in galvanized steel wire rope is built for lifting and rigging tasks that require a reliable working load limit of 840 lb. The 7 x 19 strand construction provides flexibility for reeving through blocks or sheaves. It carries a cULus listing for verified compliance. Buyers who need a smaller diameter or a different coating will need another product.

Replaces worn or undersized lifting lines

Switch to this rope when an existing line shows corrosion, kinks or broken wires that reduce its safe capacity. The jump is worth it when the application demands the full 840 lb working load limit and a 18 lbf breaking strength rating. It is not suited for runs that require a higher working load or a longer continuous length than 250 ft.

Fits standard 3/16 in hardware and frees drum space

The 3/16 in diameter matches common thimbles, clips and wedge sockets without adapters. The uncoated galvanized finish allows direct attachment of Crosby-style fittings. Because the rope is supplied in a single 250 ft reel, it eliminates the need to join multiple shorter lengths on the drum. Installers who require a plastic jacket or stainless steel construction must source a different rope.

Highlights

  • 840 lb working load limit for secure lifting
  • 250 ft continuous length reduces splice points
  • 7 x 19 strand construction delivers flexibility and strength
  • Galvanised steel resists corrosion in harsh environments
  • cULus listed for verified safety compliance

Specifications

BrandEATON B-LINE

Questions about this item

What diameter thimble or sleeve matches the 3/16 in cable?

Use fittings rated for 3/16 in diameter wire rope; the 7 x 19 strand construction requires matching hardware to maintain the 840 lb working load limit.

How do I cut and terminate the 250 ft reel without reducing strength?

Cut with a cable cutter, seize both sides of the cut, then swage or mechanically splice using 3/16 in ferrules rated for 7 x 19 galvanized steel rope.

When should I retire the rope based on wear or corrosion?

Remove from service if you see broken wires, kinks, diameter reduction, or heavy galvanizing loss; inspect before each lift since the 840 lb WLL assumes undamaged rope.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.