B-LINE
B-LINE BKW125 Wire Rope Coupling 1/8 in 500 ft
Galvanised steel wire rope, 1/8 in diameter with 340 lb working load limit, supplied in a 500 ft length
- Galvanized steel resists corrosion in harsh environments
- 340 lb working load limit supports heavy lifting tasks
- 16 lbf breaking strength provides reliable safety margin
- 7x7 strand construction delivers flexibility and durability
- cULus listed certification confirms compliance with safety standards
Wire Rope for Lifting Applications
The B-LINE BKW125 is a galvanized steel wire rope designed for lifting tasks. Its 7 x 7 strand construction provides flexibility while maintaining structural integrity. The rope carries a cULus listing, confirming compliance with relevant safety standards for industrial and commercial use.
340 lb Working Load Limit and 500 ft Length
The rope offers a working load limit of 340 lb, defining the maximum load it comfortably handles during regular lifting operations. A breaking strength of 16 lbf indicates the point at which the material fails, leaving minimal headroom above the rated limit. The 500 ft continuous length suits extended runs without splicing.
Uncoated Galvanized Steel for Direct Installation
The uncoated galvanized finish delivers corrosion resistance without additional coatings that could affect grip or inspection. The 1/8 in diameter fits compatible sheaves, drums and fittings without requiring adapters. The rope arrives ready for termination with standard wire rope clips or swaged fittings, freeing installers from specialised tooling.
Highlights
- Galvanized steel resists corrosion in harsh environments
- 340 lb working load limit supports heavy lifting tasks
- 16 lbf breaking strength provides reliable safety margin
- 7x7 strand construction delivers flexibility and durability
- cULus listed certification confirms compliance with safety standards
Specifications
| Brand | EATON B-LINE |
|---|
Questions about this item
Will the 1/8 in galvanized steel rope work with existing 1/8 in cable clamps and thimbles?
Yes, the 1/8 in overall diameter matches standard 1/8 in hardware, so your current clamps and thimbles will fit the 7 x 7 strand rope.
How can I confirm the 340 lb working load limit is holding after installation?
Apply a known test load up to 340 lb and verify the 7 x 7 galvanized steel rope shows no permanent stretch or strand distortion.
Does the 500 ft reel include end fittings or must I buy sleeves and clips separately?
The reel supplies 500 ft of bare 1/8 in galvanized 7 x 7 wire rope; sleeves, clips and thimbles are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



