B-LINE
B-LINE BKP10063 Wire Rope Hanging Kit
Wire rope hanging kit for ductwork, fluorescent lighting and wire basket tray, 50 2/3 ft overall length with 100 clamps and 500 ft of 1/16 in zinc-plated rope, cULus listed
- Supports ductwork and lighting installations with 50 2/3 ft overall length
- Includes 100 BKC100 clamps for secure fastening points
- 500 ft of 1/16 in zinc-plated wire rope provides ample material
- cULus Listed certification confirms safety compliance
- Ready-to-use kit simplifies wire basket tray mounting
Wire Rope Kit for Ductwork and Lighting
The B-LINE BKP10063 Wire Rope Hanging Kit supports ductwork, fluorescent lighting and wire basket tray installations. It includes 100 BKC100 clamps and a 500 ft roll of 1/16 in diameter wire rope. The zinc plated finish provides corrosion resistance for indoor use.
Replaces Field-Cut Suspension Methods
This kit replaces custom-cut wire and separate hardware sourcing for overhead mounting jobs. The pre-measured 50 2/3 ft overall length and bundled clamps reduce on-site fabrication time. The jump is worth it when a project demands cULus listed components and consistent hardware across multiple drop points.
Verify Mounting Points and Load Requirements
Confirm that the 1/16 in wire rope diameter meets the structural load limits for your specific ductwork or lighting fixtures. Ensure the zinc plated finish suits the environment where the kit will be installed. Check that the 500 ft rope length covers the total drop distance needed across all 100 clamp locations.
Highlights
- Supports ductwork and lighting installations with 50 2/3 ft overall length
- Includes 100 BKC100 clamps for secure fastening points
- 500 ft of 1/16 in zinc-plated wire rope provides ample material
- cULus Listed certification confirms safety compliance
- Ready-to-use kit simplifies wire basket tray mounting
Specifications
| Brand | B-LINE by Eaton |
|---|
Questions about this item
What length of 1/16 in zinc-plated wire rope does the BKP10063 kit provide?
The kit contains a 500 ft spool of 1/16 in diameter zinc-plated wire rope for suspending ductwork, fluorescent lighting or wire basket tray.
How do I secure the wire rope using the 100 BKC100 clamps included?
Form a loop in the rope, insert the free end through the clamp, then tighten both set screws evenly; the common mistake is tightening only one screw, which lets the rope slip under load.
When should the zinc-plated rope or clamps be inspected or replaced?
Inspect the rope and clamps annually for corrosion, kinks or broken strands; replace any component that shows visible wear or after the cULus listing period noted by the manufacturer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



