We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A small black electronic module with two RCA sockets and a wiring harness attached

Axxess Technologies

Axxess AXLOC-TY1 2 Channel LOC Line Output Converter Toyota

SKU CH-Q211-V4AM8

Two-channel line output converter adds an amplifier to select Toyota models from 1987 to 2020 with adjustable gain and signal-sense remote turn-on

  • TypeLine Output Converter
  • Converts factory speaker signals to low-level RCA outputs for amplifier integration
  • Handles up to 55 watts per channel from the original stereo system
  • Adjustable gain controller lets you match amplifier input sensitivity precisely
  • Signal-sense remote wire supplies 12 volt 500 milliamp turn-on without extra wiring
  • Compatible with select Toyota models from 1987 through 2020

What this converter does

The Axxess AXLOC-TY1 is a two-channel line output converter built for select Toyota models from 1987 through 2020. It takes speaker-level signals from the factory radio and turns them into low-level RCA outputs so an aftermarket amplifier can be added for speakers or a subwoofer. A separate gain controller lets the installer set the output level precisely.

The spec that decides fitment

The unit handles up to 55 watts per channel from the factory system and provides a 12-volt, 500-milliamp remote turn-on lead triggered by signal sense. If the vehicle’s factory amplifier delivers more than 55 watts per channel or uses a different wiring scheme, this converter will not work correctly.

Capacity and headroom

Two channels cover a front pair or a single subwoofer, which is enough for most basic system upgrades. Builders who need more than two channels, higher than 55 watts per channel input, or integration with non-Toyota vehicles will need a different solution.

Highlights

  • Converts factory speaker signals to low-level RCA outputs for amplifier integration
  • Handles up to 55 watts per channel from the original stereo system
  • Adjustable gain controller lets you match amplifier input sensitivity precisely
  • Signal-sense remote wire supplies 12 volt 500 milliamp turn-on without extra wiring
  • Compatible with select Toyota models from 1987 through 2020

Specifications

TypeLine Output Converter

Questions about this item

What does the 55-watt-per-channel rating mean when I connect this converter to my factory stereo?

It indicates the maximum speaker-level power the converter can accept from the factory radio before converting the signal to a low-level RCA output for an amplifier.

How does the 12 V 500 mA remote wire with signal sense work in practice?

The wire outputs 12 volts at up to 500 mA when it detects an audio signal, automatically turning on a connected amplifier without a separate switched power lead.

What physical space or mounting provision does the AXLOC-TY1 need inside a Toyota dashboard?

The compact module fits behind the factory radio cavity; it requires no DIN slot or bracket, only room for the wiring harness and gain controller knob.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.