We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with wiring harness and gain controller knob

Axxess Technologies

Axxess AXLOC-CH5 2-Channel Line Output Converter for Chrysler/Fiat/Jeep/Ram 2013-Up

SKU CH-465M-J8BHE

Converts factory speaker signals into two low-level RCA outputs for adding an amplifier to Chrysler, Fiat, Jeep and Ram vehicles from 2013 onward

  • TypeLine Output Converter
  • Adds amplifier to factory system via 2-channel low-level output
  • Gain controller adjusts output level for speakers or subwoofer
  • 12 V 500 mA remote wire activates with signal sense
  • Handles 55 watts per channel for amplifier power
  • Fits Chrysler 200 2015-2017 Pacifica 2017-2020 Jeep Cherokee 2013-Up

What the AXLOC-CH5 does

This two-channel line output converter taps a factory Chrysler, Fiat, Jeep or Ram audio system and delivers a low-level signal for an aftermarket amplifier. It suits owners who want to add a subwoofer or upgraded speakers without replacing the original head unit. The included gain controller lets you match the output to the amplifier input. A signal-sensed 12 V remote wire powers the amp automatically when music plays.

Replacing the factory speaker-level feed

The unit replaces the need for a high-level input on the amplifier by converting up to 55 watts per channel of speaker-level audio into a clean pre-amp signal. The upgrade is worthwhile when the factory system lacks dedicated RCA outputs but the owner wants more bass or clearer mids. A single SPDT relay is recommended if more than one amplifier is being installed, a detail the factory wiring does not address.

Capacity and headroom

Two channels handle a front or rear pair, or a summed mono feed for a subwoofer, with 55 watts per channel of input headroom before clipping. The 500 mA remote trigger is sufficient for a single amplifier turn-on circuit but will not drive multiple amp coils reliably. Vehicles outside the listed 2013-on Chrysler family, or systems that require more than two output channels, fall outside this converter’s design limits.

Highlights

  • Adds amplifier to factory system via 2-channel low-level output
  • Gain controller adjusts output level for speakers or subwoofer
  • 12 V 500 mA remote wire activates with signal sense
  • Handles 55 watts per channel for amplifier power
  • Fits Chrysler 200 2015-2017 Pacifica 2017-2020 Jeep Cherokee 2013-Up

Specifications

TypeLine Output Converter

Questions about this item

What connectors does the AXLOC-CH5 need to plug into the factory wiring of a 2015 Jeep Cherokee?

The included AXLOC-CH5 wiring harness plugs directly into the vehicle's factory speaker-level outputs; no cutting or splicing of the original loom is required.

Which step do installers most often miss when fitting the gain controller on this converter?

Many forget to mount the separate gain controller where it can be reached after the dash is reassembled, so set the output level before final trim installation.

When should the 12 V 500 mA remote wire be checked or replaced?

Inspect the remote wire if the amplifier fails to turn on or turns on intermittently; the signal-sense circuit can degrade after years of vibration and heat cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.