METRA 82-SU1 speaker adapter and wire harness kit 6.5-6.75 in car electronics accessory
- Speaker Spacers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Axxess Technologies
Plug-in T-harness adds remote-start capability to 2014-2016 Chevy Silverado, Suburban, Tahoe and GMC Sierra, Yukon models
The Axxess AX-TGM3 is a plug-in wire harness that connects an aftermarket remote-start module to the factory wiring of compatible GM trucks and SUVs. It eliminates the need to cut or splice original cables, preserving the vehicle's electrical integrity. Installers and owners of listed 2014-2016 models can add remote-start capability without altering the OEM loom.
Each connector is moulded to match the original terminal layout on 1500, 2500 and 3500 series pickups as well as Suburban, Tahoe and Yukon models from 2014 through 2016. The T-harness plugs inline between the vehicle harness and the target module, locking with the same retention clips used by the factory. This design prevents loose pins, simplifies troubleshooting and allows the assembly to be routed alongside existing wiring bundles.
The harness contains no active electronics, so it draws no current and generates no heat of its own. Signal paths are straight-through copper conductors sized to the factory specification, meaning voltage drop remains negligible and the vehicle's existing fuses protect the circuit. Because there are no relays, processors or moving parts, the installation adds no audible noise and imposes no extra demand on the charging system.
| Type | Wire Harness |
|---|
The AX-TGM3 plugs directly into the factory wiring harness of 2014-2016 GM trucks and SUVs, carrying power, ground, ignition and data signals between the remote-start module and the vehicle without cutting any original wires.
The harness routes behind the dash and connects to the factory connector at the BCM location; no brackets, screws or extra clearance are needed beyond the existing wiring cavity.
Disconnect the battery, unplug the factory connector at the BCM, insert the T-harness in-line, then reconnect the battery; the step most often missed is leaving the battery connected while plugging in the harness, which can trigger a security lockout.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?