We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Axiom XFP transceiver module, silver metal housing with LC connector and label visible

Axiom

Axiom XFP-10G-Z-OC192-LR2-AX 10GBASE-ZR XFP transceiver

SKU CH-AFSG-5HD39

A 1550 nm XFP transceiver for 10GBASE-ZR links up to 80 km over single-mode fibre

  • Device TypeTransceiver
  • Wavelength1550nm
  • Max Distance80km
  • FeatureData-rate: 10GBASE-ZR Form-factor: XFP Connector: LC Complia
  • 10GBASE-ZR data rate supports 10 Gbps long-haul links
  • 80 km reach over single-mode fibre at 1550 nm wavelength
  • XFP MSA compliant form-factor works in any MSA-compatible platform
  • LC duplex connector simplifies patch-cord management
  • RoHS compliant and IEEE 802.3ae certified for regulated deployments

Long-haul 10 Gbps XFP module

The Axiom XFP-10G-Z-OC192-LR2-AX is a single-mode transceiver built for 10GBASE-ZR links up to 80 kilometres. It uses a 1550nm laser and LC duplex connectors in the industry-standard XFP form factor. The module complies with XFP MSA, IEEE 802.3ae and RoHS requirements.

Suits operators extending 10G circuits across

Network engineers who need to bridge sites separated by tens of kilometres on existing XFP line cards will find the reach and wavelength a direct fit. Buyers whose equipment only accepts SFP+ cages or who require shorter-reach, lower-cost optics for campus distances should look at other form factors and wavelength options.

80km reach at 1550nm on single-mode fibre

This distance and wavelength combination is the decisive specification; it determines whether the link budget matches the span between your sites without intermediate amplification.

Highlights

  • 10GBASE-ZR data rate supports 10 Gbps long-haul links
  • 80 km reach over single-mode fibre at 1550 nm wavelength
  • XFP MSA compliant form-factor works in any MSA-compatible platform
  • LC duplex connector simplifies patch-cord management
  • RoHS compliant and IEEE 802.3ae certified for regulated deployments

Specifications

BrandAxiom
ModelXFP-10G-Z-OC192-LR2-AX
Device TypeTransceiver
Wavelength1550nm
Max Distance80km
FeatureData-rate: 10GBASE-ZR
Form-factor: XFP
Connector: LC
Compliant Standards
XFP MSA Compliant
RoHS Compliant
IEEE 802.3ae

Questions about this item

What slot width and LC connector spacing does the XFP form-factor require in my switch?

The module uses the industry-standard XFP cage footprint and dual-LC receptacles, so any MSA-compliant XFP port with standard LC spacing will accept it.

Which side of the bail latch clicks first when seating the transceiver, and how far should it go?

Insert the module label-side up until the metal bail latch engages with a single audible click; the latch must sit flush with the cage face to guarantee electrical contact.

When should I plan to clean or replace the 1550 nm optical interfaces on this 80 km ZR module?

Inspect and clean both LC ferrules with a fibre scope and lint-free swabs whenever link budget drops 3 dB or after any unplug event; replace the transceiver if cleaned interfaces still exceed the vendor loss threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.