We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with LC duplex port, metallic housing and side label

Axiom

Axiom TN-SFP-10G-ER-AX 10GBASE-ER SFP+ transceiver 1550nm 40km LC

SKU CH-EC3G-JMEBZ

A 10GBASE-ER SFP+ transceiver for single-mode fibre at 1550 nm reaching 40 km with LC connectors and DOM support

  • Device TypeTransceiver
  • StandardsIEEE 802.3ae
  • Network MediaSMF
  • Wavelength1550nm
  • PortsLC
  • Max Distance40km
  • 10GBASE-ER speed for 40km single-mode links
  • 1550nm wavelength on LC duplex connector
  • Digital Optical Monitoring gives real-time link health
  • SFP+ MSA form factor fits standard cages
  • IEEE 802.3ae and RoHS compliant design

10GBASE-ER SFP+ for 40 km links

The Axiom TN-SFP-10G-ER-AX is a hot-pluggable SFP+ transceiver built for 10 Gigabit Ethernet over single-mode fibre. It operates at 1550 nm with an LC duplex connector and reaches 40 km. The module complies with IEEE 802.3ae and SFP+ MSA standards and includes Digital Optical Monitoring for real-time link diagnostics.

Replaces shorter-reach optics or copper uplinks

If an existing 10GBASE-LR or direct-attach cable cannot span the required distance, this ER-rated module closes the gap without changing line cards or switches. The jump is worth it when campus, metro or data-centre interconnects exceed 10 km and single-mode infrastructure is already in place or planned.

Hot-swap into any SFP+ cage with LC patch cords

Insert the transceiver into a powered SFP+ port and connect standard LC single-mode patch cables; no tools or software configuration are required. The most common issues are mismatched wavelengths on the far end, dirty or angled connector end-faces exceeding loss budgets, and ports that lack DOM support preventing alarm visibility.

Highlights

  • 10GBASE-ER speed for 40km single-mode links
  • 1550nm wavelength on LC duplex connector
  • Digital Optical Monitoring gives real-time link health
  • SFP+ MSA form factor fits standard cages
  • IEEE 802.3ae and RoHS compliant design

Specifications

BrandAxiom
ModelTN-SFP-10G-ER-AX
Device TypeTransceiver
StandardsIEEE 802.3ae
Network MediaSMF
Wavelength1550nm
PortsLC
Max Distance40km
Transfer Rate10GBASE-ER
FeatureMode: Single-mode Fiber (SMF)
Model: TN-SFP-10G-ER-AX (100% Transition Compatible)
Data-rate: 10GBASE-ER
Form-factor: SFP+
Connector: LC
Wavelength: 1550nm
Distance: 40km
Features: Digital Optical Monitoring (DOM) Support
Compliant Standards:
SFP+ MSA Compliant
RoHS Compliant
IEEE 802.3ae

Questions about this item

What slot and fiber type does the TN-SFP-10G-ER-AX need?

The transceiver uses an SFP+ slot and requires single-mode fiber with LC duplex connectors for the 1550 nm link.

How is the module installed, and what step is often missed?

Insert the SFP+ module until it clicks, then connect the LC cables; the step often missed is removing the dust caps from both the module and the patch cords before linking.

When should the transceiver be replaced or checked?

Monitor the Digital Optical Monitoring data for rising Tx power or falling Rx sensitivity; replace the unit if errors increase on the 40 km single-mode path.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.