We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Axiom SFP+ transceiver with RJ-45 port, metallic finish

Axiom

Axiom AXG100784 10GBASE-T SFP+ Transceiver RJ-45 30m TAA

SKU CH-F0X5-MNH5N

10GBASE-T SFP+ transceiver with RJ-45 copper connectivity up to 30 metres, TAA and SFP MSA compliant

  • Device TypeTransceiver
  • StandardsIEEE 802.3an
  • Network MediaCopper
  • PortsRJ-45
  • Max Distance30m
  • Transfer Rate10GBASE-T
  • 10 Gbps throughput over copper cabling via IEEE 802.3an standard
  • RJ-45 connector fits existing Cat6a infrastructure without rewiring
  • 30 metre reach covers typical rack-to-switch links
  • TAA compliant for government and federal procurement requirements
  • SFP+ form factor enables hot-swap deployment in compatible switches

Axiom 10GBASE-T SFP+ transceiver

This Axiom AXG100784 module delivers 10GBASE-T connectivity over copper cabling in an SFP+ form factor. It is designed for network operators who need to add RJ-45 10 GbE ports to compatible switches or routers. The transceiver supports links up to 30 metres and meets IEEE 802.3an requirements.

Check SFP+ port compatibility and cabling

Verify that the host device accepts SFP+ transceivers and explicitly supports 10GBASE-T copper modules, as not all SFP+ cages provide the necessary PHY. Ensure the installed cabling is Category 6a or better to achieve the rated 30 metre reach. Confirm the switch firmware recognises third-party TAA-compliant optics.

Sustained 10 GbE throughput over copper

The module maintains line-rate 10 GbE traffic across the full 30 metre distance without the latency variability sometimes seen in shorter-reach optical variants. Copper media dissipates heat differently than fibre, so the host chassis must supply adequate airflow to the SFP+ cage during continuous high-load operation. TAA compliance ensures eligibility for government procurement cycles.

Highlights

  • 10 Gbps throughput over copper cabling via IEEE 802.3an standard
  • RJ-45 connector fits existing Cat6a infrastructure without rewiring
  • 30 metre reach covers typical rack-to-switch links
  • TAA compliant for government and federal procurement requirements
  • SFP+ form factor enables hot-swap deployment in compatible switches

Specifications

BrandAxiom
ModelAXG100784
Device TypeTransceiver
StandardsIEEE 802.3an
Network MediaCopper
PortsRJ-45
Max Distance30m
Transfer Rate10GBASE-T
FeatureMode: Copper
Model: AXG100784 (100% Ruckus Compatible)
Data-rate: 10GBASE-T
Form-factor: SFP+
Connector: RJ-45
Distance: 30m
Compliant Standards:
TAA Compliant
SFP MSA Compliant
RoHS Compliant
IEEE 802.3an

Questions about this item

Does the Axiom AXG100784 transceiver ship with a patch cable or must I supply my own Cat6a lead?

Only the transceiver module is included; a Cat6a or better RJ-45 patch cable up to 30 metres must be purchased separately.

The listing shows a single 30-metre copper version — are there other reach or fibre options under the same AXG100784 part number?

No, AXG100784 is a fixed 10GBASE-T SFP+ module with an RJ-45 connector rated for 30 metres over copper; other reaches or media types carry different part numbers.

In a live rack the module is rated for 30 metres — what cable grade and installation practice actually delivers that distance?

The 30-metre figure assumes Cat6a or Class EA cabling, proper termination, and total channel length including patch cords not exceeding 30 metres.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.