Axiom
Axiom 32GB DDR3-1333 ECC LV RDIMM Kit (2 x 16GB) for Cisco UCS-MR-2X162RX-C
ECC registered DDR3 kit adds 32 GB in two 16 GB modules at 1333 MHz for compatible Cisco servers
- 32 GB kit handles heavy workloads with 2 x 16 GB modules
- DDR3-1333 speed delivers 1333 MHz registered performance
- ECC low-voltage design reduces power draw
- 240-pin RDIMM form factor fits Cisco UCS-MR-2X162RX-C
- 100 % compatibility guaranteed with SMARTnet-safe operation
Purpose-built kit for Cisco UCS servers
This 32 GB DDR3-1333 ECC LV RDIMM kit contains two 16 GB modules designed for Cisco UCS-MR-2X162RX-C systems. The registered DIMM format and ECC capability target enterprise workloads that demand data integrity and stable operation. Compatibility is validated so the memory will not void SMARTnet or system warranty coverage.
Thermals noise and power draw
Low-voltage DDR3-1333 modules run at 1333 MHz with reduced power consumption compared with standard-voltage parts. The 240-pin RDIMM design spreads heat across the PCB for improved dissipation without active cooling. Registered signalling adds electrical buffering that steadies the memory bus under sustained load.
What the bundle changes
The kit delivers a matched pair of 16 GB RDIMMs so the server populates a single channel pair for optimal interleaving. Axiom’s lifetime replacement warranty on DRAM and five-year coverage on Flash components back the upgrade. Guaranteed compatibility removes the risk of POST failures or SMARTnet disqualification when expanding Cisco UCS memory capacity.
Highlights
- 32 GB kit handles heavy workloads with 2 x 16 GB modules
- DDR3-1333 speed delivers 1333 MHz registered performance
- ECC low-voltage design reduces power draw
- 240-pin RDIMM form factor fits Cisco UCS-MR-2X162RX-C
- 100 % compatibility guaranteed with SMARTnet-safe operation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 240-pin DDR3 RDIMMs in a Cisco UCS server, and what step is often missed?
Align the notch on each 16 GB module with the slot key, press firmly until both side clips click, then verify the system recognises the full 32 GB at 1333 MHz in the BIOS before loading the OS.
What maintenance or replacement will the ECC LV RDIMM kit need over time?
The modules have no moving parts and require no scheduled maintenance; if a 16 GB stick ever fails, replace it with an identical DDR3-1333 ECC LV RDIMM to keep the registered signal and 10660 bandwidth matched.
What limit appears first when the kit runs sustained workloads at 1333 MHz?
The registered DDR3-1333/PC3-10660 interface caps throughput at 1333 MHz, so memory bandwidth becomes the bottleneck before the 32 GB capacity or the low-voltage operation does.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



