Avantalk
Avantalk 2 in 1 Accessory for Lenovo 300E Chromebook 2nd Gen 11.6" 1366x768
Replacement 11.6 inch 1366x768 LCD touch display assembly for Lenovo 300E Chromebook 2nd Gen
- 6 inch replacement restores your Lenovo 300E 2nd Gen display
- 1366x768 resolution matches the original Chromebook panel exactly
- Includes touch glass digitizer and control board for full touch function
- Pre-tested assembly reduces risk of fitting a faulty screen
- 3 month quality warranty covers the replacement panel
Replacement Screen for Lenovo 300E Chromebook 2nd
This Avantalk display assembly is built for the Lenovo 300E Chromebook second generation with an 11.6 inch panel. It combines the LCD, touch glass, digitizer board, bezel and touch control board into one unit. The part matches model numbers including 5D10Y67266, 5D10Y97713 and 81MB. It is not compatible with the first-generation 300e or Winbook models.
Thermals Noise and Power Draw
As a passive display component, this screen adds no active cooling, fan noise or independent power draw to the system. It operates entirely from the laptop's existing power supply and produces no audible sound. Installation requires disconnecting the battery and power adaptor before fitting the assembly.
1366x768 Resolution Decides Fit
The native resolution of 1366x768 is the single specification that confirms this is the correct panel for your device. Verify the part numbers on your original screen against the listed compatibles such as 5D10T79505 and 5D11B01178 before purchase. Professional installation is strongly recommended due to the fragile nature of the component.
Highlights
- 6 inch replacement restores your Lenovo 300E 2nd Gen display
- 1366x768 resolution matches the original Chromebook panel exactly
- Includes touch glass digitizer and control board for full touch function
- Pre-tested assembly reduces risk of fitting a faulty screen
- 3 month quality warranty covers the replacement panel
Specifications
No published specifications for this item yet.
Questions about this item
How is the 11.6 inch 1366x768 LCD assembly installed, and what step is often missed?
Disconnect the power adaptor and battery cable first, then fit the complete panel with touch glass, digitizer board, bezel and touch control board; skipping the battery disconnect risks shorting the 300E 2nd Gen motherboard.
What maintenance or replacement will this display assembly need later?
The 3-month quality warranty covers early defects; after that the fused 11.6 inch LCD, touch glass and digitizer must be replaced as one unit if cracked, dead-pixelled or if touch calibration drifts.
What limit appears first under sustained use of this touchscreen?
Continuous pressure on the 1366x768 touch layer can degrade digitizer sensitivity before the LCD backlight shows noticeable dimming.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
