Autonics Corp
Autonics Corp E40H12-1000-3-N-24 Rotary Encoder 1000P/R NPN 12-24VDC IP50
Incremental rotary encoder delivers 1000 pulses per revolution with NPN open-collector output on 12-24 VDC supply
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 1000 pulses per revolution deliver precise position feedback
- NPN open collector output simplifies integration with PLC inputs
- 12 to 24 VDC supply range suits common industrial power rails
- 300 kHz maximum response frequency supports high-speed motion control
- IP50 rating protects internal optics from dust ingress
Industrial Position Feedback
The Autonics E40H12-1000-3-N-24 is an incremental rotary encoder built for industrial motion control. It delivers 1000 pulses per revolution through an NPN open collector output. The unit suits automation engineers integrating precise position or speed feedback into PLC or counter systems.
Wiring And Voltage Check
Verify that the control system accepts NPN open collector signals before installation. Confirm the supply voltage sits within 12 to 24 VDC with ripple under 5 percent. Ensure the controller input can handle a maximum response frequency of 300 kHz for accurate pulse capture.
Mechanical Integration
The encoder mounts via a hollow shaft with a 12 mm inner diameter and uses a radial cable connection for wiring access. It operates up to 5000 rpm with a starting torque below 50 gf.cm. The IP50 rated housing protects internal optics from dust in enclosed cabinet environments.
Highlights
- 1000 pulses per revolution deliver precise position feedback
- NPN open collector output simplifies integration with PLC inputs
- 12 to 24 VDC supply range suits common industrial power rails
- 300 kHz maximum response frequency supports high-speed motion control
- IP50 rating protects internal optics from dust ingress
Specifications
| Brand | Autonics |
|---|---|
| Model | E40H12-1000-3-N-24 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What comes in the box and what must I supply separately?
The box contains one Autonics E40H12-1000-3-N-24 rotary encoder with a radial cable. You must provide a 12-24VDC power supply within ±5% ripple and a mounting arrangement for the Ø12 mm shaft.
How do I choose between the available versions or capacities?
This specific model is fixed at 1000 pulses per revolution with NPN open-collector output and IP50 protection. Other resolutions, output types or protection ratings would be different part numbers.
What does the 300 kHz maximum response frequency mean once the encoder is installed?
It allows reliable pulse counting up to 5000 rpm at the full 1000 P/R resolution, so the connected controller receives clean position data throughout the rated speed range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
