AUGLAMOUR
AUGLAMOUR DisplayPort 1.4 Bi-Directional KVM Switch 8K@30Hz 4K@120Hz 2-Port
A bi-directional DisplayPort 1.4 switch toggles between two sources on one display or one source across two monitors at up to 8K 30 Hz, 4K 120 Hz or 1080p 240 Hz
- TypeDisplayport
- Monitor Connections2 Ports
- Video Resolution8K
- PC SelectionPush Buttons
- Toggle between two PCs on one display with push-button control
- Share a single DisplayPort source across two monitors in splitter mode
- Support for 8K at 30 Hz and 4K at 120 Hz resolutions
- Bi-directional design handles both switching and splitting scenarios
- Up to 32.4 Gbps bandwidth with DisplayPort 1.4 compatibility
Bi-Directional DP 1.4 KVM Switch
This DisplayPort 1.4 KVM switch lets you share one monitor between two computers or toggle a single computer between two displays. It is built for users who need to switch video sources without unplugging cables. Only one display is active at a time.
Push-Button Source Selection
Switching between connected sources is done with the front-panel push buttons. No software or hotkeys are required, so the switch works with any operating system that outputs a DisplayPort signal.
8K@30Hz and 4K@120Hz Headroom
The switch passes up to 8K at 30 Hz, 4K at 120 Hz and 1080p at 240 Hz with 32.4 Gbps bandwidth. When two sources run at different resolutions the output is limited to the lower resolution. It does not support simultaneous dual-display output.
Highlights
- Toggle between two PCs on one display with push-button control
- Share a single DisplayPort source across two monitors in splitter mode
- Support for 8K at 30 Hz and 4K at 120 Hz resolutions
- Bi-directional design handles both switching and splitting scenarios
- Up to 32.4 Gbps bandwidth with DisplayPort 1.4 compatibility
Specifications
| Type | Displayport |
|---|---|
| Monitor Connections | 2 Ports |
| Video Resolution | 8K |
| PC Selection | Push Buttons |
Questions about this item
What does the 8K@30Hz headline mean when I connect this switch to my monitor?
The switch passes an 8K signal at up to 30 Hz from a single source to one display, provided you use a DisplayPort 1.4 cable and the source outputs 8K.
Which DisplayPort standard does the switch use and what bandwidth does that cap?
It uses DisplayPort 1.4, limiting total bandwidth to 32.4 Gbps, which governs the maximum resolution and refresh rate combinations.
What cables and power do I need to install the unit on my desk?
You need standard DisplayPort 1.4 cables for each connection and the included power cable to run the switch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



