Audiocontrol
Audiocontrol LC-1.1500 1500 Watt Mono Amplifier 2 in 1 Accessories
A high-power mono subwoofer amplifier delivers 1500 watts RMS at 2 ohms with AccuBASS processing to overcome factory bass roll-off
- 1500 watts RMS at 2 ohms delivers powerful bass
- AccuBASS circuit corrects factory bass roll-off
- High and low level inputs accept wide voltage range
- Mono subwoofer amplifier designed for car audio
- New condition ensures full performance out of the box
High-Power Mono Subwoofer Amplifier
The AudioControl LC-1.1500 is a 1500 watt mono amplifier built for car audio subwoofer systems. It delivers high RMS power at 2 ohms for demanding bass installations. The unit accepts both high-level and low-level inputs for broad compatibility. Patented AccuBASS technology corrects factory bass roll-off and heavy equalization.
For Installers Needing Factory Integration
This amplifier suits installers who need to overcome aggressive factory bass management without a dedicated pre-amp output. The wide input voltage range handles speaker-level and line-level signals cleanly. Buyers who require multi-channel amplification or built-in digital signal processing should look at other solutions. It is a single-channel device focused purely on subwoofer duty.
1500 Watts RMS at 2 Ohms
The 1500 watt RMS rating at 2 ohms is the specification that determines if this amplifier matches your subwoofer load. Verify your subwoofer wiring presents a 2 ohm load to achieve rated output. Lower or higher impedance loads will change the available power significantly. This figure decides whether the LC-1.1500 is the right part for the install.
Highlights
- 1500 watts RMS at 2 ohms delivers powerful bass
- AccuBASS circuit corrects factory bass roll-off
- High and low level inputs accept wide voltage range
- Mono subwoofer amplifier designed for car audio
- New condition ensures full performance out of the box
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the high-level and low-level inputs on the LC-1.1500, and which wiring step causes the most issues?
Use the high-level inputs for speaker-level signals from a factory head unit and the low-level RCA inputs for aftermarket sources; the most common error is leaving the input-mode switch in the wrong position for the chosen signal type.
What maintenance will the LC-1.1500 need after extended use?
Periodically check that the power and ground terminals remain tight, verify the cooling fins are free of dust, and confirm the protection LED stays off during normal operation.
What is the first limit the LC-1.1500 hits during sustained heavy bass?
Thermal protection engages first when the heatsink temperature exceeds the safe threshold, muting output until the amplifier cools.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
