We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Audio-Technica AT-VM95E dual moving magnet cartridge with elliptical stylus

Audio-Technica

Audio-Technica AT-VM95E cartridge with 0.3 x 0.7 mil elliptical stylus

SKU CH-R2DR-HMS7Z MPN AT-VM95E

A dual moving-magnet cartridge with a .3 x .7 mil elliptical stylus, 4.0 mV output and half-inch mount for low-distortion vinyl playback

  • TypeTurntable
  • ColorGreen
  • Elliptical stylus tracks grooves precisely with .3 x .7 mil tip
  • Dual moving magnet coil produces strong 4.0 mV output signal
  • Low-resonance housing reduces unwanted vibration for clearer sound
  • Threaded inserts allow quick two-screw headshell mounting without nuts
  • Interchangeable VM95 body accepts any of six AT-VMN95 replacement styli

Cartridge type and mount

The AT-VM95E is a dual moving magnet cartridge built for half-inch mount turntables. Its green body houses a 0.3 x 0.7 mil elliptical stylus that tracks grooves with precision. A special coil design produces a 4.0 mV output level with low distortion. Threaded inserts allow two-screw mounting without nuts.

Who this suits and who should look elsewhere

Buyers wanting a straightforward moving magnet upgrade with user-replaceable stylus options will find it practical. The shared VM95 body accepts any of the six AT-VMN95 replacement styli for future changes. It is not for systems that require a moving coil cartridge or a different mounting standard.

Deciding specification

The 0.3 x 0.7 mil elliptical stylus profile determines tracing ability and high-frequency response. This shape is the single factor that decides whether the cartridge matches the playback quality you expect.

Highlights

  • Elliptical stylus tracks grooves precisely with .3 x .7 mil tip
  • Dual moving magnet coil produces strong 4.0 mV output signal
  • Low-resonance housing reduces unwanted vibration for clearer sound
  • Threaded inserts allow quick two-screw headshell mounting without nuts
  • Interchangeable VM95 body accepts any of six AT-VMN95 replacement styli

Specifications

BrandAudioTechnica
TypeTurntable
ColorGreen
Shipping weight0.04 kg
Package size25 × 25 × 25 mm

Questions about this item

Does my turntable need a half-inch mount to use this cartridge?

Yes, the AT-VM95E is designed for half-inch mount turntables and attaches with two screws using the threaded inserts in its housing.

Can I keep my existing headshell when fitting this cartridge?

The cartridge mounts directly to any standard half-inch headshell with two screws — no nuts are required.

How do I know the cartridge is tracking correctly after installation?

A properly aligned AT-VM95E with its 0.3 x 0.7 mil elliptical stylus will deliver the rated 4.0 mV output with low distortion and clear channel separation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.