ATPAZDB
ATPAZDB NV173FHM-NX1 17.3" FHD 1920x1080 IPS 120Hz 40-pin laptop screen
A 17.3 inch IPS replacement panel with 1920x1080 resolution, 120Hz refresh rate, 250 cd/m² brightness, 800:1 contrast and a 40-pin connector
- Compatible ModelsNV173FHM-NX1
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD 1920x1080 IPS clarity for sharp detail
- 120 Hz refresh rate for smoother motion
- 40-pin video connector matches original panel
- 250 cd/m² brightness suits indoor use
- 800:1 contrast ratio adds depth to images
Exact-match replacement panel
This 17.3 inch IPS display carries the NV173FHM-NX1 part number and delivers Full HD 1920x1080 resolution at a 120Hz refresh rate. A 40-pin video connector and 250 cd/m² brightness complete the specification. It is a new panel built for direct installation in compatible notebooks.
Repair technicians and DIY laptop owners
The screen fits only systems that specify the NV173FHM-NX1 model and accept a 40-pin non-touch IPS panel with 800:1 contrast. Buyers needing touch input, a different connector count, or a higher brightness level must source an alternative part.
Connector pin count
The 40-pin video signal connector is the single specification that determines physical and electrical compatibility with the host laptop. Verify the original screen uses an identical 40-pin interface before ordering.
Highlights
- Full HD 1920x1080 IPS clarity for sharp detail
- 120 Hz refresh rate for smoother motion
- 40-pin video connector matches original panel
- 250 cd/m² brightness suits indoor use
- 800:1 contrast ratio adds depth to images
Specifications
| Part Number | NV173FHM-NX1 |
|---|---|
| Compatible Models | NV173FHM-NX1 |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What existing laptop connector must match the 40-pin video signal interface on this NV173FHM-NX1 panel?
Your laptop must use a 40-pin eDP connector; count the pins on the old screen's ribbon cable to confirm it matches before ordering.
Will the 120 Hz refresh rate and 1920x1080 resolution work with my current GPU and display cable?
The panel accepts a 120 Hz signal at 1920x1080 over its 40-pin link; your GPU and cable must support that timing or the screen will fall back to a lower rate.
How can I verify the panel is operating at its specified 120 Hz refresh rate after installation?
Open the display settings in Windows or Linux and confirm the refresh-rate dropdown shows 120 Hz as the active choice for the 1920x1080 resolution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



