ATPAZDB
ATPAZDB NV173FHM-N4C laptop screen 17.3" FHD 1920x1080 IPS 60Hz 30-pin
A 17.3 inch IPS laptop replacement screen with 1920x1080 resolution, 60Hz refresh rate, 300 cd/m² brightness and a 30-pin connector
- Compatible ModelsNV173FHM-N4C
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 17.3" Full HD clarity at 1920x1080 resolution
- Wide IPS viewing angles with 1200:1 contrast ratio
- Bright 300 cd/m² panel for vivid indoor use
- Smooth 60 Hz refresh for everyday computing
- Direct-fit 30-pin connector matches NV173FHM-N4C exactly
Replacement screen for 17.3 inch laptops
This 17.3 inch IPS panel delivers Full HD 1920x1080 resolution at a 60Hz refresh rate. It connects via a 30-pin video signal connector and offers 300 cd/m² brightness with a 1200:1 contrast ratio. The screen is a non-touch display designed as a direct replacement for the NV173FHM-N4C part number.
Compatibility and use-case fit
The panel suits owners of laptops that originally shipped with the NV173FHM-N4C screen and need an identical replacement. It is not suitable for devices requiring a different connector pin count, a touch-sensitive layer, a higher refresh rate, or a different physical size.
Critical specification: 30-pin connector
The 30-pin video signal connector is the single detail that determines whether this panel will install and function in a given laptop. Verify the original screen uses the same 30-pin interface before ordering.
Highlights
- Sharp 17.3" Full HD clarity at 1920x1080 resolution
- Wide IPS viewing angles with 1200:1 contrast ratio
- Bright 300 cd/m² panel for vivid indoor use
- Smooth 60 Hz refresh for everyday computing
- Direct-fit 30-pin connector matches NV173FHM-N4C exactly
Specifications
| Part Number | NV173FHM-N4C |
|---|---|
| Compatible Models | NV173FHM-N4C |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
My laptop currently uses a 30-pin video connector; does this NV173FHM-N4C panel plug straight into that same cable?
Yes — the panel ships with a 30-pin video signal connector, so it connects directly to a matching 30-pin motherboard cable.
I am keeping my existing 60 Hz display controller; will this 60 Hz IPS screen run without any timing changes?
The screen operates at 60 Hz, matching a 60 Hz controller, so no refresh-rate adjustment is required.
After fitting the panel, how can I confirm the 1920x1080 resolution and 300 cd/m² brightness are active?
Check the display settings in your OS — they should report 1920x1080 at 60 Hz, and a brightness meter or the OS slider will show output near 300 cd/m².
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



