ATPAZDB
ATPAZDB NV133FHM-N4D 13.3" FHD 1920x1080 30-pin 60Hz laptop screen
A 13.3 inch Full HD laptop replacement screen with a 30-pin connector, 60 Hz refresh rate, 250 cd/m² brightness and 800:1 contrast ratio
- Compatible ModelsNV133FHM-N4D
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail at 1920x1080 resolution
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector matches NV133FHM-N4D exactly
- 250 cd/m² brightness for clear indoor viewing
- Non-touch 13.3" panel keeps weight low
13.3 inch FHD replacement screen
This is a 13.3 inch Full HD laptop replacement screen with a 1920x1080 resolution. It uses a 30-pin video signal connector and operates at a 60Hz refresh rate. The panel has a brightness of 250 cd/m² and a contrast ratio of 800:1. It is a non-touch display designed to match the NV133FHM-N4D part number.
Compatibility and touch requirements
This screen suits owners of laptops that use the exact NV133FHM-N4D panel with a 30-pin connector and no touch layer. Buyers whose devices require a different pin count, a touch digitiser, or a higher refresh rate should look at other options. The 60Hz refresh rate and fixed 30-pin interface limit use to compatible models only.
30-pin connector decides fit
The single specification that decides fit is the 30-pin video signal connector. Your laptop must use this exact pin layout and a non-touch 13.3 inch Full HD panel. If the original screen uses a different connector or includes touch, this part will not work.
Highlights
- Sharp Full HD detail at 1920x1080 resolution
- Smooth 60 Hz refresh for everyday tasks
- 30-pin connector matches NV133FHM-N4D exactly
- 250 cd/m² brightness for clear indoor viewing
- Non-touch 13.3" panel keeps weight low
Specifications
| Part Number | NV133FHM-N4D |
|---|---|
| Compatible Models | NV133FHM-N4D |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
My laptop uses a 30-pin video connector — will this panel plug straight in?
Yes — the screen carries a 30-pin video signal connector that matches the NV133FHM-N4D specification.
I'm keeping my existing 60 Hz drive electronics; will the 13.3" 1920x1080 panel run at its native refresh without timing issues?
The panel is rated for 60 Hz at Full HD 1920x1080, so it will synchronise with a 60 Hz source without additional configuration.
After fitting the screen, how can I confirm the 250 cd/m² brightness and 800:1 contrast are being delivered?
Display a full-white test pattern and measure luminance with a calibrated meter; you should read approximately 250 cd/m², and a checkerboard pattern should yield an 800:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



