ATPAZDB
ATPAZDB NE173FHM-NZ2 laptop screen 17.3 1920x1080 40 pins 240Hz
A 17.3 inch Full HD 1920x1080 laptop replacement panel with a 240 Hz refresh rate, 300 cd/m² brightness, 1000:1 contrast and a 40-pin connector
- Compatible ModelsNE173FHM-NZ2
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- 3 inch Full HD clarity for sharp visuals
- 240Hz refresh rate delivers smooth motion
- 300 cd/m² brightness ensures vivid images
- 1000:1 contrast ratio produces deep blacks
- 40-pin connector matches NE173FHM-NZ2 exactly
Compatibility check
This 17.3 inch panel matches the NE173FHM-NZ2 part number and uses a 40 pin connector. It delivers Full HD 1920x1080 resolution at a 240Hz refresh rate with 300 cd/m² brightness and a 1000:1 contrast ratio. The screen has no touch layer.
Who this suits and who it does not
It suits repair jobs where the original panel is a NE173FHM-NZ2 with a 40 pin video signal. It will not work for models that need a different pin count, a touch digitiser, a lower refresh rate or a different resolution. Builders who need a touchscreen or another part number should look elsewhere.
Deciding specification
The 40 pin video connector is the single detail that determines fit. If the laptop cable and motherboard expect 40 pins this panel will connect; any other pin count makes it incompatible.
Highlights
- 3 inch Full HD clarity for sharp visuals
- 240Hz refresh rate delivers smooth motion
- 300 cd/m² brightness ensures vivid images
- 1000:1 contrast ratio produces deep blacks
- 40-pin connector matches NE173FHM-NZ2 exactly
Specifications
| Part Number | NE173FHM-NZ2 |
|---|---|
| Compatible Models | NE173FHM-NZ2 |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What cable does the 40-pin connector on this NE173FHM-NZ2 panel need?
The panel uses a standard 40-pin eDP video signal connector that plugs directly into the matching socket on the laptop motherboard.
Will the 240 Hz refresh rate and 1920×1080 resolution work with the existing GPU in my laptop?
The panel runs at its native 1920×1080 resolution and 240 Hz refresh rate when the laptop GPU and display driver support that timing; otherwise it will fall back to a lower rate the GPU can drive.
How can I verify the screen is delivering 300 cd/m² brightness and 1000:1 contrast after installation?
Display a full-white test pattern and measure centre luminance with a calibrated meter — it should read around 300 cd/m² — then show a checkerboard to confirm the 1000:1 contrast ratio.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



