ATPAZDB
ATPAZDB NE160QDM-N62 laptop screen 16″ 40-pin WQXGA 2560x1600 60Hz
A 16 inch replacement panel with WQXGA 2560x1600 resolution, 60Hz refresh, 40-pin connector, 350 cd/m² brightness and 1500:1 contrast, non-touch
- Compatible ModelsNE160QDM-N62
- Screen Size16 inch
- Screen ResolutionWQXGA 2560x1600
- Sharp 16″ WQXGA 2560x1600 detail for crisp visuals
- 350 cd/m² brightness keeps content clear in bright rooms
- 1500:1 contrast ratio adds depth to dark scenes
- 60 Hz refresh rate delivers smooth everyday motion
- 40-pin connector matches NE160QDM-N62 for direct fit
Direct replacement panel
The ATPAZDB NE160QDM-N62 is a 16 inch laptop replacement screen built to match the original part number. It delivers a WQXGA 2560x1600 resolution on a non-touch panel with a 40-pin video signal connector. This unit suits repair technicians and owners restoring a compatible notebook to factory display specifications.
Fixed 60 Hz output
The panel runs at a 60Hz refresh rate with a measured brightness of 350 cd/m² and a contrast ratio of 1500:1. These figures describe the visual output in normal indoor use without requiring additional cooling or power circuitry beyond the laptop's standard display subsystem. No touch layer is present, reducing parasitic draw.
Simple 40-pin integration
Installation connects through the existing 40-pin cable and mounting points used by the NE160QDM-N62 model. The non-touch surface keeps the assembly thin, preserving hinge clearance and bezel fit. Builders needing touch input or a different pin count should select an alternate panel.
Highlights
- Sharp 16″ WQXGA 2560x1600 detail for crisp visuals
- 350 cd/m² brightness keeps content clear in bright rooms
- 1500:1 contrast ratio adds depth to dark scenes
- 60 Hz refresh rate delivers smooth everyday motion
- 40-pin connector matches NE160QDM-N62 for direct fit
Specifications
| Part Number | NE160QDM-N62 |
|---|---|
| Compatible Models | NE160QDM-N62 |
| Screen Size | 16 inch |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
How do I install the NE160QDM-N62 40-pin connector correctly?
Power off the laptop, disconnect the battery, align the 40-pin video cable with the panel connector, press it in fully until it clicks, then secure the bezel screws. The step often missed is reseating the cable if the display shows lines or no image after first boot.
What part will need replacement if the backlight dims on this NE160QDM-N62 panel?
The 350 cd/m² backlight is integrated into the panel, so a noticeable drop in brightness means replacing the entire NE160QDM-N62 screen assembly rather than a separate inverter or lamp.
At what refresh rate does the NE160QDM-N62 hit its motion limit during long sessions?
The panel is specified at 60 Hz, so sustained fast motion will show blur or ghosting once content exceeds that refresh rate; no higher mode is supported by the 40-pin interface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



