ATPAZDB
ATPAZDB NE133QDM-N61 laptop screen 13.3" 2560x1600 40 pins 60Hz
13.3-inch WQXGA replacement panel with 2560×1600 resolution, 40-pin connector, 60 Hz refresh, 300 cd/m² brightness and 1500:1 contrast
- Compatible ModelsNE133QDM-N61
- Screen Size13.3 inch
- Screen ResolutionWQXGA 2560x1600
- Sharp WQXGA 2560x1600 detail on 13.3 inch panel
- Smooth 60 Hz refresh for everyday tasks
- 40-pin connector ensures direct fit for NE133QDM-N61
- 300 cd/m² brightness for clear indoor viewing
- 1500:1 contrast adds depth to text and images
13.3 inch WQXGA replacement panel
The ATPAZDB NE133QDM-N61 is a 13.3 inch laptop replacement screen with a WQXGA 2560x1600 resolution. It uses a 40-pin video signal connector and operates at a 60Hz refresh rate. The panel delivers 300 cd/m² brightness and a 1500:1 contrast ratio. It is a non-touch display designed for specific laptop repairs.
For non-touch WQXGA repairs only
This screen suits technicians replacing a damaged NE133QDM-N61 panel in a compatible 13.3 inch notebook. It matches the original 40-pin interface, 60Hz timing and 2560x1600 pixel grid. Buyers needing touch functionality, a different pin count, or a higher refresh rate should look at other parts.
40-pin connector defines fit
The single specification that decides compatibility is the 40-pin video signal connector. The replacement panel must match this exact interface to connect to the laptop's internal cable. Verify the original screen uses a 40-pin layout before ordering.
Highlights
- Sharp WQXGA 2560x1600 detail on 13.3 inch panel
- Smooth 60 Hz refresh for everyday tasks
- 40-pin connector ensures direct fit for NE133QDM-N61
- 300 cd/m² brightness for clear indoor viewing
- 1500:1 contrast adds depth to text and images
Specifications
| Part Number | NE133QDM-N61 |
|---|---|
| Compatible Models | NE133QDM-N61 |
| Screen Size | 13.3 inch |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
How do I install the NE133QDM-N61 screen and which step causes the most issues?
Disconnect the battery, remove the bezel, unplug the old panel's 40-pin connector, fit the new screen, reconnect the 40-pin cable securely, then test before reassembling. The step most people get wrong is not seating the 40-pin connector fully, causing no image or flicker.
What maintenance or replacement will the NE133QDM-N61 need later?
The panel itself has no user-serviceable parts. Over time the backlight may dim below the 300 cd/m² spec or the 1500:1 contrast may drop, at which point the whole screen would need replacing again.
What limit appears first on the NE133QDM-N61 during sustained use?
The 60 Hz refresh rate caps motion clarity, so fast scrolling or gaming will show blur before the 300 cd/m² brightness or 1500:1 contrast become limiting factors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



