ATPAZDB
ATPAZDB NE133QDM-N60 laptop screen 13.3" WQXGA 2560x1600 40 pins 60Hz
13.3 inch WQXGA 2560x1600 laptop replacement screen with 40 pin connector, 60Hz refresh rate, 300 cd/m² brightness and 1500:1 contrast ratio
- Compatible ModelsNE133QDM-N60
- Screen Size13.3 inch
- Screen ResolutionWQXGA 2560x1600
- Sharp WQXGA detail from 2560x1600 resolution
- Smooth 60Hz refresh keeps motion fluid
- Bright 300 cd/m² panel for clear viewing
- High 1500:1 contrast adds depth to images
- Exact 40-pin fit for NE133QDM-N60 models
13.3" WQXGA Replacement Panel
This ATPAZDB NE133QDM-N60 panel is a 13.3 inch laptop replacement screen with a 2560x1600 WQXGA resolution. It uses a 40 pin video signal connector and operates at a 60Hz refresh rate. The display offers 300 cd/m² brightness and a 1500:1 contrast ratio. It is a non-touch model designed for specific notebook repair.
Suits 40-pin non-touch repairs
This screen fits technicians replacing a damaged NE133QDM-N60 panel in a compatible 13.3 inch notebook. Buyers whose laptop requires a touch-enabled digitizer or a different pin count connector cannot use this part. It is also unsuitable for devices needing a higher refresh rate or alternative resolution.
40 pin connector compatibility
The single specification deciding fit is the 40 pin video signal connector matched to the NE133QDM-N60 part number. Your laptop's original screen must use this exact interface and pin configuration for installation to work. Verify the connector type on the faulty unit before ordering this replacement panel.
Highlights
- Sharp WQXGA detail from 2560x1600 resolution
- Smooth 60Hz refresh keeps motion fluid
- Bright 300 cd/m² panel for clear viewing
- High 1500:1 contrast adds depth to images
- Exact 40-pin fit for NE133QDM-N60 models
Specifications
| Part Number | NE133QDM-N60 |
|---|---|
| Compatible Models | NE133QDM-N60 |
| Screen Size | 13.3 inch |
| Screen Resolution | WQXGA 2560x1600 |
Questions about this item
Does the 40-pin connector carry a 60 Hz signal at 2560×1600 resolution?
Yes, the 40-pin video connector supports the panel's native WQXGA 2560×1600 resolution at a 60 Hz refresh rate.
Will this 13.3 inch panel fit the existing mounting points in a NE133QDM-N60 chassis?
The screen is built to the NE133QDM-N60 form factor, so its 13.3 inch dimensions and mounting tabs align with the original chassis.
What is the correct way to seat the 40-pin cable without damaging the connector?
Align the cable squarely, insert it fully until the retaining latch clicks, then secure the latch; forcing it at an angle bends the delicate pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



