ATPAZDB
ATPAZDB N164HGE-L12 16.4" FHD 1920x1080 60Hz 40-pin laptop screen
A 16.4 inch Full HD laptop replacement screen with 1920x1080 resolution, 60Hz refresh rate, 300 cd/m² brightness, 500:1 contrast and a 40-pin connector
- Compatible ModelsN164HGE-L12
- Screen Size16.4 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 1920x1080 Full HD detail on a 16.4 inch panel
- Smooth 60 Hz refresh keeps everyday motion fluid
- Bright 300 cd/m² output for clear indoor viewing
- 500:1 contrast ratio adds depth to text and images
- 40-pin connector matches the N164HGE-L12 part for direct replacement
Direct-fit 16.4-inch FHD panel
The ATPAZDB N164HGE-L12 is a 16.4-inch Full HD replacement screen built to match the original part number N164HGE-L12. It uses a 40-pin video connector and a non-touch surface, so it fits laptops designed for that exact interface.
1920×1080 at 60 Hz with 300 cd/m² brightness
The panel delivers 1920 by 1080 resolution at a 60 Hz refresh rate and 300 cd/m² typical brightness. A 500:1 contrast ratio provides adequate separation for office documents and web browsing, while the 60 Hz ceiling limits smoothness in fast motion.
Low-power 60 Hz operation runs cool and silent
With no backlight boost or high-refresh circuitry, the screen draws modest power and generates minimal heat during normal use. The absence of a touch layer removes an extra component that could trap warmth, keeping thermals and noise unobtrusive.
Highlights
- Sharp 1920x1080 Full HD detail on a 16.4 inch panel
- Smooth 60 Hz refresh keeps everyday motion fluid
- Bright 300 cd/m² output for clear indoor viewing
- 500:1 contrast ratio adds depth to text and images
- 40-pin connector matches the N164HGE-L12 part for direct replacement
Specifications
| Part Number | N164HGE-L12 |
|---|---|
| Compatible Models | N164HGE-L12 |
| Screen Size | 16.4 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 40-pin connector on this N164HGE-L12 panel match the cable on my existing 16.4 inch laptop?
The panel uses a 40-pin video signal connector; verify your laptop's service manual lists the same part number N164HGE-L12 to confirm pin-out compatibility.
How can I confirm the 1920x1080 60Hz panel is operating correctly after installation?
Boot into the OS display settings and check that the detected resolution reads 1920x1080 at 60 Hz, then look for uniform brightness near the rated 300 cd/m² and no dead pixels.
Does the box include mounting brackets or adhesive strips, or must I source them separately?
The screen ships as the bare N164HGE-L12 panel only; brackets, bezel clips and any adhesive are not included and must be reused from the original display or purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



