ATPAZDB
ATPAZDB N156HCA-EA1 15.6 inch FHD 1920x1080 IPS 30 Pin laptop screen
A 15.6 inch IPS panel with 1920x1080 resolution, 300 cd/m² brightness, 700:1 contrast, 60Hz refresh and a 30-pin connector
- Compatible ModelsN156HCA-EA1
- Screen Size15.6 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail at 1920x1080 resolution
- Wide viewing angles from 15.6 inch IPS panel
- Bright 300 cd/m² output for clear visibility
- Smooth 60Hz refresh rate for everyday use
- Direct 30-pin fit for N156HCA-EA1 models
15.6-inch FHD IPS replacement panel
This 15.6-inch IPS display delivers a 1920x1080 resolution at 60 Hz with 300 cd/m² brightness and a 700:1 contrast ratio. It uses a 30-pin video connector and has no touch functionality. The panel is built as a direct replacement for the N156HCA-EA1 part number.
Laptops needing a 30-pin FHD non-touch screen
This screen suits repair jobs where the original panel matches the N156HCA-EA1 part number, 15.6-inch size, Full HD resolution and 30-pin interface. It will not fit laptops that require a different pin count, a touch digitiser, a higher refresh rate or a different physical size.
30-pin video connector compatibility
The 30-pin connector is the single specification that decides fitment; the replacement will only work if the laptop’s cable and motherboard header use the identical 30-pin layout. Verify the part number on the original screen before ordering.
Highlights
- Sharp Full HD detail at 1920x1080 resolution
- Wide viewing angles from 15.6 inch IPS panel
- Bright 300 cd/m² output for clear visibility
- Smooth 60Hz refresh rate for everyday use
- Direct 30-pin fit for N156HCA-EA1 models
Specifications
| Part Number | N156HCA-EA1 |
|---|---|
| Compatible Models | N156HCA-EA1 |
| Screen Size | 15.6 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the 30-pin connector on this N156HCA-EA1 screen without damaging the pins?
Power off the laptop and disconnect the battery. Align the 30-pin connector squarely with the socket and press straight in until it seats; forcing it at an angle bends the delicate pins.
What part will need replacement if the backlight dims unevenly after extended use?
The LED backlight module behind the IPS panel is the component that ages; when brightness drops below the rated 300 cd/m² or shows patchy illumination, the panel assembly must be swapped.
At what sustained brightness level does the panel hit its thermal limit during long sessions?
The display is specified at 300 cd/m² maximum brightness; running continuously at that level is the point where heat buildup stabilises and no further increase is possible.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



