ATPAZDB
ATPAZDB N133DCE-GT1 laptop screen 13.3" UHD 4K 3840x2160 40 pins 60Hz
A 13.3 inch UHD 4K 3840x2160 laptop replacement screen with 40 pins, 60Hz refresh rate, 300 cd/m² brightness and 1500:1 contrast ratio
- Compatible ModelsN133DCE-GT1
- Screen Size13.3 inch
- Screen ResolutionUHD 4K 3840x2160
- Sharp UHD 4K detail with 3840 x 2160 resolution
- Smooth motion at 60 Hz refresh rate for everyday use
- Bright 300 cd/m² output for clear indoor viewing
- Deep contrast at 1500:1 ratio enhances dark scenes
- Direct 40-pin fit for N133DCE-GT1 replacement
Screen specifications
This is a 13.3 inch UHD 4K replacement panel with a 3840x2160 resolution and 40-pin video connector. It operates at 60Hz with 300 cd/m² brightness and a 1500:1 contrast ratio. The screen is non-touch and built to match the N133DCE-GT1 part number.
Who this suits and who it does not
It fits laptops designed for the exact N133DCE-GT1 panel with a 40-pin interface and 13.3 inch dimensions. Buyers needing a touch-enabled display or a different pin count should look elsewhere. Builders whose device requires a higher or lower refresh rate will not be able to use this screen.
The deciding specification
The 40-pin video signal connector determines compatibility with the laptop's internal cable. If the original screen uses a different pin layout this panel will not connect.
Highlights
- Sharp UHD 4K detail with 3840 x 2160 resolution
- Smooth motion at 60 Hz refresh rate for everyday use
- Bright 300 cd/m² output for clear indoor viewing
- Deep contrast at 1500:1 ratio enhances dark scenes
- Direct 40-pin fit for N133DCE-GT1 replacement
Specifications
| Part Number | N133DCE-GT1 |
|---|---|
| Compatible Models | N133DCE-GT1 |
| Screen Size | 13.3 inch |
| Screen Resolution | UHD 4K 3840x2160 |
Questions about this item
Does my laptop need a 40-pin eDP connector to accept this N133DCE-GT1 panel?
Yes — the screen uses a 40-pin video signal connector, so the host laptop must provide a matching 40-pin eDP interface.
Will the 60 Hz refresh rate of this 13.3" UHD panel work with my older 60 Hz laptop display output?
The panel runs at 60 Hz, matching a typical 60 Hz laptop output, so the refresh rates are compatible.
How can I confirm the 3840×2160 resolution and 300 cd/m² brightness are active after installation?
Check the display settings in the OS to verify 3840×2160 is selected, and use a calibration tool or on-screen meter to measure 300 cd/m² peak brightness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



