ATPAZDB
ATPAZDB M133NWF4RD laptop screen 13.3 inch 1920x1080 IPS 60Hz 30 pin
A 13.3 inch IPS replacement panel with 1920x1080 resolution, 60Hz refresh, 220 cd/m² brightness, 1200:1 contrast and a 30-pin connector
- Compatible ModelsM133NWF4RD
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail on a 13.3 inch panel
- Wide IPS viewing angles for consistent colour
- 60 Hz refresh keeps motion smooth
- 30-pin connector matches original laptop socket
- 220 cd/m² brightness with 1200:1 contrast ratio
13.3 inch IPS replacement panel
The ATPAZDB M133NWF4RD is a 13.3 inch IPS display panel built as a direct replacement for laptops using this part number. It delivers a 1920x1080 Full HD resolution at a 60Hz refresh rate with a 30 pin video connector. The screen has a matte non-touch surface and is supplied in new condition.
Ideal for repairing a cracked or dim panel
This panel suits owners of a laptop designed for the M133NWF4RD part who need a like-for-like Full HD IPS replacement. It is not suitable for machines that require a different connector pin count, a higher refresh rate, a touch digitiser, or a different physical size.
30 pin eDP connector decides fit
The single specification that determines compatibility is the 30 pin video signal connector matched to the M133NWF4RD part number. If the original screen uses a different pin layout or cable routing this panel will not connect.
Highlights
- Sharp Full HD detail on a 13.3 inch panel
- Wide IPS viewing angles for consistent colour
- 60 Hz refresh keeps motion smooth
- 30-pin connector matches original laptop socket
- 220 cd/m² brightness with 1200:1 contrast ratio
Specifications
| Part Number | M133NWF4RD |
|---|---|
| Compatible Models | M133NWF4RD |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will this 30-pin M133NWF4RD panel connect directly to the existing cable in my 13.3-inch laptop?
Yes, the panel uses a 30-pin video signal connector that matches the original M133NWF4RD specification, so the factory cable plugs in without an adapter.
How can I confirm the 1920x1080 IPS display is running at its native 60 Hz after installation?
Open the display settings in your operating system and verify the resolution shows 1920x1080 with a 60 Hz refresh rate; the IPS panel should also deliver the rated 220 cd/m² brightness and 1200:1 contrast.
Does the box include mounting brackets or adhesive strips, or must I reuse the original bezel hardware?
Only the M133NWF4RD screen panel is supplied; brackets, bezel clips and any adhesive are not included and must be sourced from the original laptop or purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



