ATPAZDB
ATPAZDB M133NWF4R2 13.3 inch laptop screen FHD 1920x1080 IPS 60Hz 30 pin
13.3 inch Full HD IPS laptop replacement panel with 1920x1080 resolution, 60Hz refresh, 220 cd/m² brightness, 500:1 contrast and 30-pin connector
- Compatible ModelsM133NWF4R2
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- FHD 1920x1080 resolution for sharp detail
- IPS panel gives wide viewing angles
- 60 Hz refresh rate for smooth motion
- 220 cd/m² brightness for clear indoor use
- 30-pin connector matches M133NWF4R2 models
Replacement screen details
This 13.3 inch IPS panel delivers a 1920x1080 Full HD picture at 60Hz. It connects through a 30 pin video signal connector and offers 220 cd/m² brightness with a 500:1 contrast ratio. The matte non-touch surface suits standard office and media viewing.
Who this fits and who it does not
It is built as a direct replacement for devices using the M133NWF4R2 part number. Buyers needing touch input, a higher refresh rate, or a different connector layout should look elsewhere.
The deciding specification
The 30 pin video signal connector determines physical compatibility with the laptop's cable and motherboard header. Verify this exact pin count against the original screen before ordering.
Highlights
- FHD 1920x1080 resolution for sharp detail
- IPS panel gives wide viewing angles
- 60 Hz refresh rate for smooth motion
- 220 cd/m² brightness for clear indoor use
- 30-pin connector matches M133NWF4R2 models
Specifications
| Part Number | M133NWF4R2 |
|---|---|
| Compatible Models | M133NWF4R2 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 30-pin video connector on this 13.3 inch panel match my laptop's cable?
The panel uses a 30-pin video signal connector, so it will connect directly to a laptop cable that also has a 30-pin interface.
What is the main installation step that people miss when fitting this 13.3 inch IPS screen?
After securing the panel, the 30-pin connector must be fully seated and the retaining latch locked; a loose connection causes flicker or no image.
If the backlight dims over time, what part of this 13.3 inch FHD panel would need replacement?
The backlight is integrated into the IPS panel, so a dimming fault means replacing the entire M133NWF4R2 display assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



