ATPAZDB
ATPAZDB M125NWF6R0 12.5" 1920x1080 120Hz 40-Pin Laptop Screen
12.5 inch Full HD laptop replacement panel with 120 Hz refresh rate, 400 cd/m² brightness and 40-pin connector
- Compatible ModelsM125NWF6R0
- Screen Size12.5 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 120 Hz motion for smooth visuals
- Full HD 1920x1080 resolution shows fine detail
- 400 cd/m² brightness works well in bright rooms
- 40-pin connector fits M125NWF6R0 models exactly
- 5 inch non-touch panel keeps weight low
Compatible 12.5" 40-Pin Replacement Panel
This 12.5 inch display carries part number M125NWF6R0 and fits laptops specifying that exact panel. It delivers Full HD 1920x1080 resolution at a 120Hz refresh rate through a 40-pin video connector. The matte finish operates without touch functionality.
Suitable for Direct Panel Swaps Only
Repair technicians and owners replacing a damaged M125NWF6R0 screen can install this unit directly. Buyers whose laptop uses a different part number, a 30-pin or 50-pin interface, or an integrated touch layer cannot use this panel. Systems requiring higher brightness or a wider colour gamut should seek alternative specifications.
40-Pin Connector Decides Fit
The single specification that determines compatibility is the 40-pin video signal connector paired with the M125NWF6R0 part number. If the original screen uses a different pin count or a different part number, this display will not connect or function. Verify the part number on the existing panel before ordering.
Highlights
- Sharp 120 Hz motion for smooth visuals
- Full HD 1920x1080 resolution shows fine detail
- 400 cd/m² brightness works well in bright rooms
- 40-pin connector fits M125NWF6R0 models exactly
- 5 inch non-touch panel keeps weight low
Specifications
| Part Number | M125NWF6R0 |
|---|---|
| Compatible Models | M125NWF6R0 |
| Screen Size | 12.5 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 40-pin connector on this 12.5 inch panel match my laptop's cable?
The panel uses a 40-pin video signal connector; verify your original screen also shows a 40-pin part number before ordering.
Which screws or brackets must I transfer from the old 1920x1080 screen to install this one?
Remove the bezel, unscrew the original panel, disconnect its 40-pin cable, then fit the new panel using the same mounting holes and reattach the cable.
If the 400 cd/m² backlight dims over time, can I replace just the backlight module?
The backlight is integrated into the 12.5 inch panel; when brightness degrades the whole display assembly must be swapped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



