ATPAZDB
ATPAZDB LQ173M1JW03 laptop screen 17.3" FHD 1920x1080 300Hz 40-pin
A 17.3 inch Full HD laptop replacement panel with a 300 Hz refresh rate and 40‑pin connector
- Compatible ModelsLQ173M1JW03
- Screen Size17.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- 3 inch FHD clarity from 1920x1080 resolution
- 300Hz refresh rate for fluid motion rendering
- 300 cd/m² brightness ensures vivid visuals
- 1000:1 contrast ratio delivers deep blacks
- 40-pin connector matches LQ173M1JW03 specification
Panel Purpose & Audience
This ATPAZDB LQ173M1JW03 is a 17.3 inch replacement laptop screen with a 1920x1080 Full HD resolution and a 300Hz refresh rate. It uses a 40 pin video signal connector and offers 300 cd/m² brightness with a 1000:1 contrast ratio. The panel is non touch and built to match the exact LQ173M1JW03 part number.
Fit & Exclusions
The display suits owners of a laptop that originally shipped with the LQ173M1JW03 panel and who need a direct swap for a damaged or faulty screen. Buyers whose device requires a different pin count, a touch digitiser, a different physical size or a lower refresh rate specification should look at another part.
Deciding Specification
The single specification that decides compatibility is the 40 pin video signal connector combined with the LQ173M1JW03 part number. Only systems designed for this exact connector layout and panel model will accept the screen without adapter cables or firmware mismatches.
Highlights
- 3 inch FHD clarity from 1920x1080 resolution
- 300Hz refresh rate for fluid motion rendering
- 300 cd/m² brightness ensures vivid visuals
- 1000:1 contrast ratio delivers deep blacks
- 40-pin connector matches LQ173M1JW03 specification
Specifications
| Part Number | LQ173M1JW03 |
|---|---|
| Compatible Models | LQ173M1JW03 |
| Screen Size | 17.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Will the 40-pin connector on this 17.3 inch panel match the cable on my LQ173M1JW03 laptop?
Yes, the panel uses a 40-pin video signal connector that matches the LQ173M1JW03 specification exactly.
Which step do installers most often miss when fitting this 300 Hz screen?
They forget to reseat the 40-pin cable fully and to reconnect the display bezel clips before powering on.
How do I replace the backlight if the 300 cd/m² brightness drops over time?
The backlight is integrated into the panel; a brightness loss means replacing the whole LQ173M1JW03 screen assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



